Оцінка ефективності акумулювання теплоти твердими теплоакумулюючими елементами електротеплового акумулятора
Journal Title: Вісник Національного університету "Львівська політехніка". Серія "Теорія та практика будівництва" - Year 2016, Vol 0, Issue 844
Abstract
Conducted calculated and experimental research of thermal processes and storage capacity of solid heat storage materials. Analyzed the change of the thermo physical properties of the selected heat storage materials depending on temperature. Estimated specific heat storage capacity in the temperature range from 50 °C to 650 °C such materials: magnesite, chamotte, dinas, corundum. The next step was to carry out experimental studies in order to confirm data obtained as a result of calculated studies. Studies were carried out on electric thermal storage (ETS) of electric power 2.4 kW domestic production with heat storage elements from the magnesite. Obtained temperature distribution in the wall of the channels of the heat storage elements. Also conducted measurements of the temperature of the heated air in the channels of the heat storage elements and the output of the ETS. Measurements temperatures were carried out with thermocouples chromel-alumel in ceramic shell with a measurement range from -50 °C to 1300 °C. In areas with high temperatures thermocouples were laid in the case of heat-resistant fabric. As a result of experimental studies obtained the temperature distribution in the heat storage elements of ETS. Based on these data it was calculated the amount of stored heat by heat storage elements of ETS for the complete cycle of its operation.
Authors and Affiliations
O. Khimenko
Keywords
Related Articles
- EP ID EP230900
- DOI -
- Views 97
- Downloads 0
АНАЛІЗ ЗА ДОПОМОГОЮ МАТЕМАТИЧНОГО МОДЕЛЮВАННЯ ЗАЛИШКОВОЇ НЕСУЧОЇ ЗДАТНОСТІ ІСНУЮЧИХ ЕЛЕМЕНТІВ КОНСТРУКЦІЙ ПРИ ПІДСИЛЕННІ
During the operation of the building there are situations when it is necessary to change the planning decision, which leads to interference in the bearing elements of the structure. Strengthening of any element of design...
INNOVATIVE TECHNOLOGY, OPERATION AND ENERGY MANAGEMENT OF BUILDING: SCIENCE & TECHNOLOGY PARK, TUKE
The current goal of increasing the energy efficiency of buildings should be implemented holistically, considering multidisciplinary measures during the design phase. For the application of innovative technologies it is c...
Моделювання процесів теплообміну в топках водотрубних котлів дКВР(де)-10/14
Тhe results of a numerical study of heat transfer in water-tube boiler DKVR(DE)-10/14 furnace are provided. The geometric model of the inner cavity of furnaces and burners is constructed with help of boiler and burner GM...
НАПРУЖЕНО-ДЕФОРМОВАНИЙ СТАН МЕТАЛЕВИХ ГОФРОВАНИХ КОНСТРУКЦІЙ ПРИ ВЗАЄМОДІЇ ІЗ ҐРУНТОМ ЗАСИПКИ
Multivariate analysis calculations of testing conditions of yield hinge at the top of the arch tubes showed that the origin of the yield hinge, which takes place in the vault of CIM is performed only on the condition of...
ОПТИМІЗАЦІЯ СКЛАДУ ЦЕМЕНТОҐРУНТУ З МЕТОЮ ПІДВИЩЕННЯ ЙОГО ФІЗИКО-МЕХАНІЧНИХ ПОКАЗНИКІВ
In order to ensure long-term durability and increase the bearing capacity of clay soils, it is recommended to strengthen them with binder materials. For this purpose, lime and cement are used as binder materials. In orde...