ON BELT CONVEYOR FIRE POSSIBILITY CAUSED BY COAL CHIPPING IGNITION

Abstract

In coal industry three areas of re safety on conveyor belts are formed: the creation and application of non ammable (slow-burning) conveyor belts; development and application of belt conveyor operation and management control means, eliminating the unauthorized interference; development and application of automatic re extinguishing systems. In this article the rst direction based on the paragraphs 2.2.1 RD 03-423-01 "Safety standards on conveyor belts for hazardous production facilities and the test methods" is considered where it is stated that there must be no belt frictional ignition on the drum of a test installation the temperature of which is 500°C, and for polyvinylchloride belts - less than 325 °C. The article describes the hypothesis of the thermal pulse impact on the belt and coal chipping. This impact is enough to ignite the latter and a re initiation on a conveyor belt. Measurements of the ignition temperature for the various coal mines in Kuzbass were carried out. Comparison of the ignition temperature of various coal grade chipping with belt conveyor parts and assemblies temperatures when operation was not correct allows to suggest that in ammation may occur, ie chipping in ammation can be a source of re on a conveyor belt.

Authors and Affiliations

V. M. Yurchenko

Keywords

Related Articles

MOBILE CRITICAL CARE COMPLEX FOR PROVIDING EMERGENCY MEDICAL CARE TO THE UNDERGROUND MINE ACCIDENT VICTIMS

The article is devoted to the problem solution of the required medical assistance timely rendering possibility ensuring to the coal mine underground accident victims. It is shown that, at the present moment, despite all...

THE EFFECT OF SIMPLIFYING THE METHODOLOGY OF THE CURRENT FORECAST OF THE COAL COAL EJECTION HAZARD ON THE RELIABILITY OF THE FORECAST

Two methods of the coal seam outburst hazard current forecast are considered: according to the initial gas emission rate and the output of drilling fines during the control holes drilling and its simplified version by th...

DISPERSE COMPOSITION OF DUST IN THE ATMOSPHERE THE AIR SUPPLY AND VENTILATION OF MINE WORKINGS IN COAL MINES

One of the most important scienti c problems of mine aerology remains the de nition of the function the mass distribution of dust particles sizes in the atmosphere of mine workings in coal mines. The purpose of this work...

MATHEMATICAL MODELING OF THE ANGLE EFFECT OF THE APPLICATION SHOCK LOAD WHILE DRILLING ROCK ON THE EFFICIENCY OF CHIPPING FORMATION

The article substantiates the possibility of improving the efficiency of short-hole drilling by determining the most effective angle of application of the shock load during impact-rotation drilling. Investigated the stre...

CONSTRUCTION LABOR PROTECTION AND INDUSTRIAL SAFETY CONTROL SYSTEM AND BIM-TECHNOLOGY AS A POSSIBLE TOOL IN THE SAWC (SPECIAL ASSESSMENT OF WORKING CONDITIONS) SYSTEM AND A RISK-BASED APPROACH

The urgency of work is caused by the fact that the main task of occupational safety and health in the construction industry is to ensure safe working conditions, preserve the life and health of workers, reduce accidents...

Download PDF file
  • EP ID EP198002
  • DOI -
  • Views 88
  • Downloads 0

How To Cite

V. M. Yurchenko (2016). ON BELT CONVEYOR FIRE POSSIBILITY CAUSED BY COAL CHIPPING IGNITION. Вестник научного центра по безопасности работ в угольной промышленности, 3(), 47-51. https://www.europub.co.uk/articles/-A-198002