OPTIMAL DESIGN OF HYDRAULIC SYSTEM FOR AN INDUSTRIAL PRESS MACHINE FOR PERFORMANCE IMPROVEMENT AND NOISE REDUCTION
Journal Title: Open Journal of Mechanical Engineering (OJME) - Year 2016, Vol 1, Issue 1
Abstract
In this paper, we present an optimal design of the hydraulic system for a class of industrial press machines. Such machines are expected to produce a large pressure on a work-piece and they are driven by a hydraulic system. Excessive vibration in the period where the press is changed from pressure holding to pressure relief is a common bottleneck problem with such machines. The vibration is closely related to the hydraulic system that controls a press head’s movement and is subsequently responsible for the property of work-pieces. In the present study, we proposed a novel design of the hydraulic circuit for pressure relief and applied it to a brick press machine and evaluated through simulation by AMESim software, which showed that the design is effective. Finally, the simulation results were validated in practical operation, which showed that, the violent vibration was decreased significantly and the noise level of the new machine is decreased from 80 decibel to 58 decibel.
Authors and Affiliations
Jiafeng Yao, Baochun Lu, Chris Zhang, Michio Sadatomi
Keywords
Related Articles
- EP ID EP404042
- DOI 10.26480/ojme.01.2016.19.24
- Views 95
- Downloads 0
SEVERE ENERGY SITUATION IN HEBEI PROVINCE, CHINA: WHERE IS THE WAY OUT?
In this paper, through the analysis of nearly 20 years of energy production, consumption structure in Hebei Province, we find problems between energy consumption, production and supply and demand balance and put forward...
RESEARCH ON CONSTRUCTION METHOD OF DOMAIN ONTOLOGY BASED ON THESAURUS AND THEMATIC WORDS FOR HIGH-SPEED RAILWAY
Domain ontology can be used to extend the user's retrieval words and index domanin knowledge. According to the actual situation of high-speed railway domain that is comprised by different professional fields, this paper...
FIN GEOMETRY OPTIMIZATION OF NON-NEWTONIAN FLUID, FLOWING THROUGH AN ANNULUS PIPE, USING ENTROPY GENERATION MINIMIZATION METHOD
In the present study a non-Newtonian fluid flowing in an annulus pipe, has been simulated numerically. The considered geometry is an annulus pipe equipped with some fins. Heat transfer and entropy generation for some dif...
BIO-INSPIRED BI-PLANE FLAPPING WING MAV
The research of micro aerial vehicles (MAVs) is a new field of low-Reynolds-number flow, which attracts much attention in the advanced aeronautical area. Micro air vehicles propelled by flapping wings are gaining interes...
CENTER OF GRAVITY DETECTION FOR RAILWAY CARS
Three-dimensional detection of the center of gravity (D3DCG) is an innovation to prevent rollover accidents of moving objects because D3DCG can detect the center of gravity without measuring either the weight (m) or spri...