Optimization of Material Removal Rate during Turning of Al2014t4 Material on CNC Lathe Using Taguchi Technique
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2016, Vol 4, Issue 2
Abstract
Machining of Aluminum alloy is observed by using carbide tool. There are number of parameters like cutting speed, feed and depth of cut etc. which must be given consideration during the machining of medium Aluminum alloy. This study investigates the effects and significance of process parameters on Material Removal Rate (MRR) in turning of AL2014T4. By using Taguchi method single response optimization problem is solved. The optimization of MRR is done using fifteen experimental runs based on Box Benhen design matrix method .A mathematical equation is developed based on process parameters within the experimental domain. The optimum levels of process parameters and their importance for MRR are identified based on raw data. The data is analyzed and raking is given, which parameter has significant role in MRR .Optimal results were verified through confirmation experiments.
Authors and Affiliations
B. Suresh Babu, Dr. Suresh Babu
Keywords
Related Articles
- EP ID EP21658
- DOI -
- Views 404
- Downloads 13
Protection And Security Of An Operating System
In this research paper first of all we gave a brief introduction of the operating system, furthers its types is also explained with an example and its component also. In this paper we show that what kind of problem aris...
Active and Reactive Power Distribution among Cascaded PV Inverter Modules
Large-scale grid-connected photovoltaic (PV) systems contribute to renewable energy growth, which has inspired the application of cascaded modular multilevel converters due to their unique features such as modular struc...
slugUltra-wideband L-strip proximity coupled slot loaded semicircular microstrip antenna
An analysis and design of a nove l ultra wideband L - strip proximity coupled sl ot loaded semicircular micro strip antenna is proposed. The structure is simulated on MoM based IE3D si...
Wind Energy Power System Simulation for a Remote Area Power Supply
This work focuses on the designing and analysis of a wind energy power system for a Remote Area Power Supply (RAPS). The system introduces a three phase ac-ac converter with an isolated high frequency-link for a wind en...
A Review on Effects of GTAW Process Parameters on weld
Different process parameters of Gas Tungsten Arc Welding (GTAW) affects the weldment quality. Increasing welding current increases the deposition rate and reduces the hardness. Direct current electrode negative (DCEN) p...