Performance Analysis of 4-S, 2-CC. I Engine with roselle Oil Methyl Esters with Added Ignition Improver
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
In the present work, performance analysis of twin cylinder CI engine is performed. Roselle seed oil methyl esters are extracted from the crude roselle oil by the method of trans-esterification. The tests are conducted in the 4- stroke twin (2) cylinder CI engine and tests were conducted in different stages. Primarily, the tests were performed with4-stroke twin cylinder diesel engine with a diesel fuel and noted down the observations. In the next step, experiments are done on the same engine with different blends of Roselle seed oil like B5, B15, B25 and B35, observations are noted, performance parameters are calculated and emission noted down by using gas analyser. The results obtained in the second stage are compared to decide which the better blend with diesel fuel parameters is. After Comparison was made between the diesel and bio diesel, optimum blend is selected. In the next stage, in order to increase the efficiency of the engine ignition, improver is added to the best blend. The tests are conducted on the same engine and same operating conditions, observations are noted and performance parameters calculated and emissions are noted. In the final stage, the obtained parameters with addition of ignition improver are compared with optimum fuel blend
Authors and Affiliations
Dr. Meda Chandra Sekhar, Dr. C. V. Subba Rao
Keywords
Related Articles
- EP ID EP657141
- DOI 10.24247/ijmperdaug2019146
- Views 102
- Downloads 0
An Experimental Investigation and Performance Assessment of a Solar Water Purifier
Drinking water is the most rapidly depleting resource on the earth. But it is also the one, which is taken for granted by most of the population. So to make sure that the future generations can enjoy the life on earth in...
INVESTIGATION ON TORSIONAL VIBRATION OF DRILL STRING IN CYLINDRICAL CAVITIES OF VERTICAL BORE-HOLE WITH LIQUID MEDIUM
The research work deals with the torsional vibration of a drill string in a vertical cylindrical cavity of a borehole with liquid medium. The mechanical interaction models of the drill string with viscous liquid are inve...
Energy Potential of Sugar-Mill Byproduct Press-Mud Through Pyrolysis Process
Press-mud is the sugar industry left-over produced from the filtration of the sugar cane juice during the production of sugar. At present, it is a good source of fertilizer and utilized in soil quality enhancement in Ind...
Optimization of Design Parameters of Bellows Expansion Joints
A technique for optimizing the design parameters of the metal corrugated shell of bellows expansion joints is proposed. The purpose of the development is to improve the accuracy of resource assignment, as well as further...
Investigation of AL 5383 Composite With Al2o3 and Graphite for Marine Applications
Aluminum alloy generally used in the industrial process to control metal dissolution especially in wear properties, Most of the efficient materials used in industry are the aluminum which is considered as the Alloy cost...