PERFORMANCE OF BATTERY BANK ON HYBRID MICROGRID
Journal Title: International Journal of Electrical Engineering & Technology (IJEET) - Year 2019, Vol 10, Issue 3
Abstract
A hybrid microgrid is composed of combination of the AC and DC grid which are interlined with bidirectional converter. To avoid the multiple conversion and more reliable the proposed hybrid microgrid is designed by taking diesel generators, Photovoltaic cell, induction generators and battery bank. It is connected to the utility grid in normal operating mode. During fault condition, it should disconnect and shift into island operation mode. This paper proposes a standalone hybrid generation system, fed by induction generator which is run with a battery banks, solar power, and storage battery. Hybrid microgrid is an excellent solution for electrification of remote rural areas where the grid extension is very difficult and not economical. Practically it has been seen that most of the isolated grid is powered by the diesel generation system, such systems has several problems like high cost fuel with extra transportation cost and making more pollution to the environment .To make pollution free environment ,an eco-friendly hybrid microgrid system has designed. It maintains the power quality in steady state condition. During this transient condition, the voltage and frequency of the microgrid may change rapidly due to low inertia present in microgrid. Therefore, local voltage and frequency control is one of the major challenges in islanded condition. To achieve this particle swarm optimization (PSO) algorithm is implemented in the proposed microgrid which is verified by MATLAB Simulink
Authors and Affiliations
BABITA NANDA, RANJAN KUMAR JENA
Keywords
Related Articles
- EP ID EP46596
- DOI 10.34218/IJEET.10.3.2019.007
- Views 212
- Downloads 0
AN OVERVIEW OF APPLICATIONS OF INDUCTION HEATING
Eddy currents are normally associated with losses and heating in electrical equipments and ways to mitigate the same. But this heating can be used productively for various domestic and industrial applications. In this...
A STATIC NON-LINEAR CONTROLLED BRIDGE TYPE FAULT CURRENT LIMITER FOR TRANSIENT STABILITY AUGMENTATION OF MULTI-MACHINE POWER SYSTEM
This paper implements Fault Current Limiting (FCL) requirements and proposed a calculation method to determine the required dc reactor value, for the purpose of the converter continuous operation during dc faults. On t...
STREET LIGHT GLOWS ON DETECTING THE VEHICLE MOVEMENT USING ARDUINO UNO
This paper proposes how street light can be controlled in the presence or absence of vehicle to reduce the wastage of energy. The proposed work is accomplished by using Arduino UNO and sensors that will control the ele...
CLOSED LOOP CONTROL OF MULTI LEVEL INVERTER USING REVERSE VOLTAGE TOPOLOGY
In this paper a new topology with a reversing voltage component is proposed which will improve the multilevel performance by compensating the disadvantages of increased number of components, complex pulse width modulat...
REACTIVE POWER AND AC VOLTAGE CONTROL OF LCC HVDC WITH SFCL SYSTEM WITH CONTROLLABLE CAPACITORS
This paper implements the AC voltage control of HVDC using superconducting fault current limiter (SFCL) in AC voltage control of LCC HVDC using controllable capacitors. Also to analyze the behavior of a Voltage Source...