Photocatalytic degradation of organic dyes pollutants in the industrial textile wastewater by using synthesized TiO2, C-doped TiO2, S-doped TiO2 and C,S co-doped TiO2 nanoparticles
Journal Title: Journal of Water and Environmental Nanotechnology - Year 2018, Vol 3, Issue 2
Abstract
This paper describes the photocatalytic degradation of Reactive Blue 19 (RB-19) and Reactive Red 76 (RR-76) dyes pollutant in the industrial wastewater using TiO2, C-doped TiO2 (C-TiO2), S-doped TiO2 (S-TiO2) and C,S co-doped TiO2 (C,S-TiO2) nanoparticles as photocatalysts, which were synthesized via sol-gel process. The prepared photocatalysts were characterized by scanning electron microscopy (SEM), X-Ray diffraction (XRD), Fourier transformer infra-red spectroscopy (FTIR), Energy dispersive spectroscopy (EDAX) and ultraviolet-visible absorption spectroscopy (UV-Vis). The dyes degradation was investigated under several experimental parameters such as pH, catalyst load, dye concentration, shaking speed, irradiation time and catalyst recovery. The photocatalytic dose was found to be 1.6 g/L and the efficiency of RB-19 and RR-76 photocatalytic degradation attained 100 % after 1 h irradiation time under visible light. The chemical oxygen demand (COD) values were determined for wastewater and treated wastewater. Toxicity and biological activity of the treated and untreated wastewater on marine aquatic organisms rotifer, artemia and Vibrio parahaemolyticus were investigated.
A comparative study for the electrochemical regeneration of adsorbents loaded with methylene blue
The electrochemical regeneration of methylene blue-saturated activated carbon, Nyex®1000 and sawdust has been studied and the performances in terms of capacity of adsorbent regeneration have been compared in this work. T...
Neutralization of arsenic pollutants, contained in natural waters: The theoretical analysis of solubility of some arsenates and optimization of the processes
Arsenic belongs to chemical elements, which are often found in natural waters and make it unsuitable for consumption without special treatment. Neutralization of arsenic pollutants of natural waters by converting them in...
Operating Conditions of Coagulation-Flocculation Process for High Turbidity Ceramic Wastewater
This work attempted to determine the optimum conditions required for the coagulation and flocculation process as an essential stage of the ceramic wastewater treatment. Coagulation and flocculation is a very necessary st...
An Investigation of Highly Turbulent Flow Heat Transfer Enhancement through Modified Twisted Tape Inserts and NanoFluids
Power plants are of great influential industries to the environment which could be studied in many ways. Since the optimum equipment would consume less fuel, the issue is mainly interested to those who are concerned abou...
Phytofabrication of fluorescent silver nanoparticles from Leucaena leucocephala L. leaves and their biological activities
The aim of this study was to expand an ecofriendly route for the fabrication of spherical shape silver nanoparticles (AgNPs) using an aqueous extract of Leucaena leucocephala L. leaves to act as stabilizing and reducing...