Power Flow Analysis of Weakly Meshed Distribution Network Including DG
Journal Title: Engineering, Technology & Applied Science Research - Year 2018, Vol 8, Issue 5
Abstract
Power flow is one of the essential studies in power system operation and planning. All steady-state parameters for power distribution systems, such as bus voltage magnitudes, angles, power flows, and power losses, can be calculated by conducting power flow analysis. Distribution system features differ from those of transmission system, rendering conventional load flow algorithms inapplicable. In this paper, three distribution power flow techniques are presented and tested to evaluate their performance when applied to a networked distribution system including distributed generation (DG). These are the distribution load flow (DLF) matrix, the enhanced Newton Raphson (ENR), and the robust decoupled (RD) method. IEEE 33-bus system is adopted for implementing the above methods. Radial and weakly meshed configurations are applied to the tested system with DG inclusion to investigate their influence on the power flow study findings.
Authors and Affiliations
A. Al-Sakkaf, M. AlMuhaini
Keywords
Related Articles
- EP ID EP239487
- DOI -
- Views 277
- Downloads 0
Experimental Study of an Air Lift Pump
In this investigation the effect of submergence ratio and air jacket on the performance of the air lift pump has been studied. Three types of air jackets in addition to five levels of submergence ratios were used. Each a...
Assessment of the Suitability of Paper Waste as an Engineering Material
This research work investigates the potential applicability of waste paper in the production of ceiling boards with focus on achieving: environmental sustainability, safe disposal of waste paper and more cost effective p...
A Probabilistic Approach for the Evaluation of Fault Detection Schemes in Microgrids
An important challenge in protection of a microgrid is the process of fault detection, considering the uncertainties in its topologies. Equally important is the evaluation of proposed methods as their incorrect performan...
The Effect of Multipath on Single Frequency C/A Code Based GPS Positioning
The differential GPS (DGPS) technique is one of the most popular and comparatively accurate techniques available to enhance the positioning accuracy by minimizing most of the common errors. However, the ultimate accuracy...
Buckling of Hybrid Composite Carbon/Epoxy/Aluminum Plates with Cutouts
Structural instability becomes an important concern in the composite plate safe and reliable design. In this research, a resistance analysis is carried out on plates made of hybrid composite material with and without ell...