Processes of biological wastewater treatment for nitrogen, phosphorus removal by immobilized microorganisms
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 10
Abstract
<p>Parameters of the biotechnology of wastewater treatment for nitrogen and phosphorus removal using immobilized microorganisms are investigated. The acutest problem of municipal wastewater treatment is the low removal efficiency of biogenic compounds, namely nitrogen and phosphorus. Exceeding the discharge norms for nitrogen and phosphorus compounds leads to a dangerous ecological situation in water bodies of Ukraine. The intensity of transformation of nitrogen and phosphorus compounds is limited by the rather low growth rates of nitrifying bacteria (0.25–0.35 day<sup>-1</sup>), sensitivity to pH fluctuations (the value of 6.5–8 should be maintained), competitive relations with heterotrophs. It is advisable to use immobilized microorganisms to increase the concentration of nitrifying bacteria and create favorable conditions for biomass development. The perpendicular air flow in relation to wastewater flow in the aerobic bioreactor zone, which provides the oxidation capacity by ammonium nitrogen of up to 120–130 g/(m<sup>3</sup>∙day), is investigated. It is established that the specific oxidation rate of organic matter in municipal wastewater treatment reaches 25 mg COD/(g/day), providing COD treatment efficiency of up to 90 %. The efficiency of wastewater treatment for ammonium nitrogen removal at an initial concentration of 30–50 mg/dm<sup>3</sup> is 97.3–99 %. The sequence of anaerobic-anoxic-anaerobic-aerobic processes, which provides the efficiency of wastewater treatment for removal of organic pollutants of 90–95 %, ammonium nitrogen 97–99 % and phosphates 93–95 %. with the treatment duration of up to 4 hours is studied.</p>
Authors and Affiliations
Maria Blyashyna, Veronika Zhukova, Larisa Sabliy
Keywords
Related Articles
- EP ID EP527923
- DOI 10.15587/1729-4061.2018.127058
- Views 85
- Downloads 0
Effect of step heat treatment modes on the physical-mechanical properties of concrete
<p class="a"><span lang="EN-US">Heat treatment of waterproof heavy concrete samples using heated air in step modes is carried out. It is indicated that these experiments are an integral part of the research of the method...
Development of the method for rapid detection of hazardous atmospheric pollution of cities with the help of recurrence measures
The method for rapid detection of hazardous pollution of the atmosphere of cities, which is based on dynamic measures of recurrence (repeatability) of the states of the pollution concentration vector, was developed. The...
Development of a resource-process approach to increasing the efficiency of electrical equipment for food production
<p>Specific indicators of heat and electric power consumption per unit of food production have object-oriented properties, since they are determined on the basis of methods that are suitable only for a particular enterpr...
Research of the impact of the method of heating of heat units on the qualitative characteristics of treated materials
<p>An analytical method for calculating the chemical potentials of the components of the gas-solid system based on thermodynamic calculations of carbon potentials of the С–О–Н–N gas mixture (combustion products of the me...
Preservation of parsnip root vegetable depending on the degree of ripeness, varietal features, and storage techniques
<p>The degree of ripening of vegetables, fruits and berries affects their preservation. It is not possible to detect the degree of ripening of parsnip by the size of a root crop, since growing conditions and agricultural...