Radar-eddy current GPR
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2014, Vol 0, Issue 57
Abstract
Introduction. At present there are many electrical schematic metal detectors (the most common kind of ground penetrating radar), which are differ in purpose. Each scheme has its own advantages and disadvantages compared to other schemes. Designing metal detector problem of optimal selection of functional units most schemes can only work with a narrow range of special purpose units. Functional units used in circuits can be replaced by better ones, but specialization schemes do not provide such a possibility. Description of problem. Author has created a "complex for research of functional units of metal detectors" that is the universal system that meets the task. With this set of studies conducted on the practical implementation of radar-eddy current method of distinguishing non-ferrous metals (gold, copper, etc.) is based. Description of method. Mathematical tools using have to be treated as a signal metal detector to distinguish metals: gold, copper and others. Conclusions. Processing of partial pulses may have information about beforehand signal loss during propagation in heterogeneous media with lossy nonuniform distribution parameters. Using eddy currents To calculate the value of the input voltage depending on the conductivity of the metal in the receiving antenna.Combining two different methods for processing the received signal theoretically it could be proved that with high probability can distinguish non-ferrous metals - gold, copper etc.
Authors and Affiliations
A. Abramovych
Keywords
Related Articles
- EP ID EP309000
- DOI 10.20535/RADAP.2014.57.77-82
- Views 73
- Downloads 0
Radiation characteristics of novel “ring-in-cone” antenna
Results of numerical investigations of radiation characteristics of the finite “ring-on-rod” antenna and a novel combined “ring-in-waveguide” and “ring-in-cone” antenna are presented.
Analysis of similarity and discrepancy of response of linear system to etalon signal by the instrumentality of double normal transformation
Methodology of distortion estimation of input signal with dispersion of component values by the instrumentality of double normal transformation was demonstrated.
Determination of measurement error of spurious signals in power network
Is defined the additional errors to the errors of the measuring device brings the equivalent of a network or adapter (filter) used to measure the spurious high-frequency signals in power network.
Mathematical model of instantaneous frequency measuring process of radioemission phasemeasuring sources by interference type devices
Formulation of the problem in general. The question of determination of the instantaneous significance of the radio emission sources’ carrier frequency in the conditions of high aprior uncertainty of signal parameters an...
The reliability parameters definition in radioelectronic devices automated designing systems
The reliability parameters calculating problems for radioelectronic devices determined by thermal modes are considered. It is shown that such calculations should be based on temperature definition methods for separate co...