Reparatory and Manufacturing Hard-Facing of Working Parts Made of Stainless Steels in Confectionary Industry
Journal Title: Tribology in Industry - Year 2012, Vol 34, Issue 3
Abstract
In this paper, for the sake of improving the reparatory hard-facing technology is especially analyzed reparatory hard-facing of tools for manufacturing compressed products in confectionary industry. Those products are being made of a mixture consisting of several powdery components, which is compressed under high pressure. In that way the connection between particles is realized, thus achieving certain hardness and strength of the confectionary product. The considered tool is made of high-alloyed stainless steel. The tool contains 30 identical working places. Besides the production process wear, on those tools, from time to time, appear mechanical damage on some of the products' shape punches, as cracks at the edges, where the products' final shapes are formed. Those damages are small, size wise, but they cause strong effect on the products' final shape. The aggravating circumstance is that the shape punch is extremely loaded in pressure, thus after the reparatory hard-facing, the additional heat treatment is necessary. Mechanical properties in the heat affected zone (HAZ) are being leveled by annealing and what also partially reduces the residual internal stresses.
Authors and Affiliations
S. Rakić, V. Lazić, R. Nikolić, D. Milosavljević
Keywords
Related Articles
- EP ID EP151203
- DOI -
- Views 53
- Downloads 0
Investigation on the Mechanical and Tribological Properties of Aluminium-Tin Based Plain Bearing Material
The purpose of this study is to investigate the Mechanical and Tribological properties of plain bearing alloys used especially in internal combustion engines. The mechanical properties namely Tensile strength and Hardnes...
The Tribological Investigations of Multicomponent Multilayered Ion-Plasma Coatings Avinit
The friction and wear characteristics of sliding friction in conditions of boundary lubrication for coatings, received by ion-plasma method on the heat resistant deformed alloy of АК4-1 type are investigated. Conducted t...
Tribological Behavior of Aluminium Metal Matrix Composite with Addition of Bamboo Leaf Ash by GRA-Taguchi Method
The bamboo leaf ash (BLA) which was extruded from agro waste was used as a particulate reinforcement to produce economical AMMCs. The dry sliding wear behavior of Al-4.5 wt.% Cu alloy with the addition of 2, 4 and 6 wt.%...
Development of Zn50 Brazing Alloy for Joining Mild Steel to Mild Steel (SAE1018)
This work has developed new brazing alloys for joining mild steel to mild steel (SAE1018) at a lower temperature. The alloys blends and error analysis were done by experimental design software (Design Expert 8.0.7.1). De...
Effect of TiN Nanoparticles on the Friction and Wear Properties of Spark Plasma Sintered Fe-Cr-Ni
This study evaluated the dry sliding wear and friction behaviour of spark plasma sintered Fe-Cr-Ni (a duplex stainless steel known as SAF 2205) matrix with titanium nitride (TiN) nanoparticles as reinforcement. Tests wer...