Research on Design Optimization of Levitation Controller Reliability for Medium-low Speed Maglev Vehicles
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 9
Abstract
Objective Levitation controller is a key component of the medium-low speed maglev vehicle, and its reliability directly affects the stability and reliability of the vehicle′s levitation system. Therefore, it is necessary to improve the reliability of the levitation controller. Method With a single levitation electromagnet containing two levitation controllers as the research object, through analyzing the reliability of the levitation controller, its reliability model is established, and a fault tree analysis is conducted to identify the key factors influencing the levitation controller. By transforming two levitation controllers in the single levitation electromagnet into one levitation controller, an optimization scheme for the levitation controller is proposed, together with the redundant design for some key components. Based on the circuit principle of the optimized levitation controller, a reliability model and a fault tree model for the optimized levitation controller are established, and comparison analysis is conducted on the reliability of the levitation controller before and after the optimization. Result & Conclusion Compared with the levitation controller before optimization when a single levitation electromagnet contains two levitation controllers, the total failure rate of which is 2.282×10-6 h-1, the rate of an optimized single levitation electromagnet levitation controller is 1.064×10-6 h-1, a decrease of 53.37%. The reliability of the optimized levitation controller is significantly higher than that of the original one.
Authors and Affiliations
Qifa CHEN, Hongwei JIANG, Huajun LUO
Keywords
Related Articles
- EP ID EP744363
- DOI 10.16037/j.1007-869x.2024.09.055
- Views 42
- Downloads 0
Optimization Analysis of Treatment Scheme for Metro Tunnel Base Waterlogged Collapsible Loess Formation
Objective To study the optimization measures for treating waterlogged collapsible loess stratum, it is necessary to investigate the deformation characteristics of tunnel structures after loess collapse by waterlogging. M...
Influencing Factors and Control Effects of Targeted Grouting Technology for Underground-excavated Metro Station Construction
[Objective] In conventional grouting construction technology, the ineffective diffusion of grout is comparatively severe and leads to unsatisfactory reinforcement effects on surrounding rock and soil mass. Therefore, it...
Analysis of Substation Outage Caused by Voltage Relays
[Objective] Analysis is carried out targeting the power outage issues occurring during the operation of urban rail transit substations, the key components causing power failure are identified, and the safety hazards lead...
Condition Assessment Method of Rail Welded Joint Equipment Based on Confidence Level
Objective To address the incomplete assessment system for seamless rail equipment conditions in China, it is necessary to establish an equipment condition assessment method for rail welded joints. Method The allowable de...
Earth Chamber Pressure Prediction Method for Earth Pressure Balance Shield Based on LSTM-DNN Fusion Model
［Objective］ Earth chamber pressure is a key parameter for EPB (earth pressure balance) shield construction assessment. Accurate prediction of earth chamber pressure helps construction technicians take timely control me...