Research progress on adsorption mechanism of radioactive iodine by metal-organic framework composites
Journal Title: China Powder Science and Technology - Year 2024, Vol 30, Issue 4
Abstract
Conclusions and Prospects Although important progress has been made in the adsorption mechanisms of radioactive iodine by MOF composites， challenges such as low adsorption capacity， slow adsorption rate， poor recyclability， and low utilization of active sites still exist. To improve the performance of MOF composites for radioiodine adsorption， further studies are needed on bismuth-doped MOF composites to achieve higher adsorption capacity for gaseous I2 through a combination of chemical adsorption and physical adsorption. Given that the water vapor temperature in nuclear fuel reprocessing can reach up to 150°C， it is essential to investigate the adsorption mechanisms of the MOF composites under high-temperature conditions. Since the study of non-radioactive 127I cannot reflect the radiation resistance of MOF composites， the adsorption performance of MOF composites under actual irradiation should be explored. In addition， while enhancing the stability and adsorption performance of metal-doped MOF composites， it is of great importance to minimize the secondary pollution caused by them. Significance Radioactive iodine， generated from nuclear power plant operations， nuclear fuel reprocessing， nuclear medicine processes， and nuclear accidents， mainly exists in the form of gaseous iodine （I2）. Gaseous I2 may form iodomethane （CH3I） with other volatile organic compounds and hydrocarbons in the gas stream. Once inhaled， the gaseous I2 and CH3I convert into forms such as 131I and 129I in the human body， leading to consequences such as metabolic imbalance， thyroid cancer， and leukemia after continuous accumulation. A small portion of radioactive iodine exists in the form of solid I2 and I-. Metal-organic framework （MOF） composites are often used to adsorb various forms of radioactive iodine because of their good modifiability， large adjustable pore size， and high thermal stability. Therefore， it is of great significance to thoroughly investigate the mechanisms of effective adsorption of radioactive iodine by MOF composites. Progress The study reviews three types of adsorption mechanisms of radioactive iodine by MOF composites chemical reaction， carrier spatial structure， and electron transfer. MOF composites doped with metals or metal oxides such as silver， copper， and bismuth have larger contact areas and more active sites. During the adsorption of radioactive iodine， these composites form compounds such as BiI3， BiOI， AgI， and CuI through chemical reactions with radioactive iodine， facilitating subsequent radionuclide solidification and other treatments. Bismuth-doped MOF composites are cost effective， low in toxicity and have the best adsorption performance for gaseous I2. Strengthening the spatial structure of MOF can improve the adsorption capacity of MOF composites for radioactive iodine. Effective methods include： doping porous materials into the MOF composites to increase the pore volume； conducting high-temperature pyrolysis to stabilize the structure， prevent collapse， and improve the uniform distribution and utilization of active sites， thus enhancing the reusability， acid resistance， and selective adsorption； integrating nanocomposite membranes or ionic liquids （ILs） with MOF composites to ensure that the adsorbent is in full contact with radioactive iodine， which is able to facilitate the recovery and reuse of adsorbents and can yield the highest I3- adsorption； changing the metal nodes of the MOF or conjugating similar MOF to derive new MOF composites， enhancing the physical adsorption performance of radioactive iodine. In electron transfer-based adsorption mechanisms， MOF composites can be carbonized to enhance the charge transfer interactions with radioactive iodine， enabling I2 to be adsorbed in the form of charge transfer complexes at the active sites of MOF composites.
Authors and Affiliations
Yi YANG, Wenrui ZHANG, Kaiwei CHEN, Yiting CHEN, Xiaojun DAI, Chunhui GONG, Peng WANG
Keywords
Related Articles
- EP ID EP749276
- DOI 10.13732/j.issn.1008-5548.2024.04.014
- Views 81
- Downloads 0
Research progress on enhanced preparation process of nano or ultra-fine WC-Co powder
[Significance] Using nano or ultra-fine tungsten carbide cobalt （WC-Co） powder as thermal spray material can effectively solve the wear and corrosion problems in mechanical parts. This paper summarizes and analyzes the...
Construction and prediction of physical fingerprints of notoginseng total saponins extracts
Objective The current research on the quality consistency evaluation of traditional Chinese medicine mainly focuses on the chemical level， and often overlooks the examination of physical quality attributes. In the produ...
Preparation and properties of lead-zinc tailings powder geopolymer concrete
[Objective] China is a major global producer and consumer of lead and zinc， but the mining of these resources generates large quantities of lead-zinc tailings. Due to the differences in mining technologies and mineral p...
Effect of co‑precipitation method on characteristic values of yYCrxMn1-xO3-（1-y） Y2O3 system
[Objective] Negative temperature coefficient （NTC） thermistors are widely used in fields such as automotive electronics， household appliances， aerospace， and medical equipment due to their ability to measure tempera...
Methods and mechanisms of solution dispersion of carbon nanotube powders
[Objective] To maximize the performance potential of carbon nanotubes（CNTs）， it is crucial to overcome the inherent tendency of CNTs to form aggregates and achieve effective dispersion within various matrices. [Progre...