Researches Regarding Waste Processing of Cellulosic Materials by Pyrolysis Process
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2011, Vol 34, Issue 4
Abstract
In this paper were performed laboratory experiments regarding processing by pyrolysis process of urban waste components (wood, paper, textiles). The authors designed and developed an experimental equipment and were applied several technological parameters such as temperature and plant maintenance time. The analysis of physical and chemical properties of obtained products found that pyrolysis process can be an effective alternative treatment of urban waste to reduce their quantity and to increase environmental protection.
Authors and Affiliations
Ana DONIGA, Dumitru DIMA, Paula POPA, Elisabeta VASILESCU
Keywords
Related Articles
- EP ID EP625658
- DOI -
- Views 89
- Downloads 0
Elastic Modulus of Coatings by Pendulum Impact Test
The pendulum impact scratch device with high precision system in measuring normal and tangential forces during scratching has been used to study elastic modulus of coatings. The criterion for evaluation of elastic modulu...
PhysicoMechanical and Physico-Chemical Properties of Bio-Inert Composite Ceramics
Bio-inert ceramics are non-toxic, non-allergenic and non-carcinogenic materials which explain why these are frequently used as orthopedic and dental implants. Unfortunately, these are chemically inert and do not naturall...
Mechanical and Tribological Properties of TiCxOy Thin Films
The main purpose of this work consists on the preparation of single layered titanium oxycarbide, TiCxOy, thin films, deposited by d.c. reactive magnetron sputtering. The depositions were carried out from a TiC solid targ...
Numerical Study on Ballistic Phenomena - Part Two
The study of ballistic phenomena (interior ballistics, exterior ballistics and terminal ballistics) is an activity that involves the use of complex and at the same time very expensive equipment. Also, another aspect wort...
Study of Thermal Conductivity Variation Depending of the Heat Treatment for Tool Steels
This paper studied the influence of quenching and tempering steel structures on the thermal conductivity for OSC 11 steel. For the experiment we used samples that were subjected to heat treatment quenching and tempering...