SCREENING MAGNETIC FIELDS OF THE POWER FREQUENCY BY THE WALLS OF HOUSES
Journal Title: Електротехніка і Електромеханіка - Year 2015, Vol 0, Issue 4
Abstract
Purpose. To investigate the effectiveness of the screening of the magnetic field at 50 Hz by the walls of house. Methodology. To study the effectiveness of the screening we used the measurements of the magnetic field 1) in the area of the shielding screen 2) in the same area without the shielding screen 3) the calculation of the shielding effectiveness by measuring. Results. We have carried out experimental investigations of the effectiveness of screening of the magnetic field at 50 Hz by the building materials, concrete walls and paneled houses. Originality. First it is experimentally established that the magnetic field with frequency of 50 Hz penetrates through walls of buildings including reinforced concrete buildings practically without any decrease. Practical value. The results obtained should be considered when assessing the hygienic level of the magnetic field in a residential area, located near air and cable lines.
Authors and Affiliations
D. Ye. Pelevin
Keywords
Related Articles
- EP ID EP301312
- DOI 10.20998/2074-272X.2015.4.10
- Views 102
- Downloads 0
STATISTIC METHODS OF POLYIMIDE ENAMEL ISOLATION DEFECTIVE NON-DESTRUCTIVE CONTROL AT THE CONDITIONS OF PRODUCTION
In this paper can be used to not-destructive technological testing of defects isolation enameled wire with polyimide polymer. The thesis is devoted to the statistical method for processing, comparison and analysis of res...
AN INDUCTION SENSOR FOR MEASURING CURRENTS OF NANOSECOND RANGE
Purpose. A current meter based on the principle of electromagnetic induction is designed to register the current flowing in the rod lightning. The aim of the article is to describe the way of increasing the sensitivity o...
CAST-FILM POLYMER COMPOSITION DOSING SYSTEM DRIVE CONTROL
Object parameters providing uniformity of polymer composition outflow from the spinneret to the substrate are analyzed. An approach to drive controller construction for a dosing system comprising a lag element is conside...
THE MAIN INVENTIONS FOR TECHNOLOGIES OF THE MAGNETIC-PULSED ATTRACTION OF THE SHEET METALS. A BRIEF REVIEW
Purpose. The description of the Equipment for the Magnetic-Pulsed Attraction (or EMF-attraction) of the sheet metals which allows non-contact deforming of ferromagnetics (the low carbon steels, for example), the non-magn...
DETERMINATION OF NANOPARTICLE FORCE BALANCE IN AN ELECTRICAL MAGNETIC SEPARATION SYSTEM
Analytical expressions for magnetic force gradient computation are given. FEM simulation of the matrix core in the working gap of a magnetic system is conducted. The magnetic force distribution is presented as a relative...