SELECTION METHODS OF DIAGNOSTATION OF SUPPLY ELECTRICAL MACHINES DC ELECTRIC LOCOMOTIVE
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2018, Vol 180, Issue 14
Abstract
The article deals with the actual problem of choosing the method of diagnosing auxiliary electric cars of electric locomotives. From the reliability of electric cars traction rolling stock depends not only on the reliability of the locomotive, but also traffic safety and the ability to provide the transportation process. Therefore, the issue of improving the reliability of electrical machines is relevant. The analysis of existing approaches to the diagnostics of the most problematic parts - windings and bearing units is carried out. These nodes account for 89% of all births. The quality of the insulation is characterized, first of all, by the value of its resistance, which determines the main purpose of isolation - a reliable separation of current-carrying parts. The simplest method and the most frequently used method is the direct measurement of insulation resistance. This method allows, in most cases, to quickly assess the quality of the insulation and determine the suitability for further use. This method was most widely used in diagnosing the isolation of electric machines. But the lack of its informativity and the ability to predict the future state of isolation causes the search for new methods for diagnosis. Taking into account the conducted analysis, it is expedient to use two methods for inspecting the state and isolation resource: insulation resistance measurement and pulse method. At present, four methods of ultrasonic evaluation of the technical condition of rolling bearings are used in practice: the Peak-factor, the direct spectrum, the impulse impulses, and the envelope spectrum. The latter was most widely used in rail transport. It provides the most complete information on the bearing position and its components. As a result of the analysis and selected methods on test benches, it is advisable to install insulation resistance measuring equipment combined with the assessment of absorption and polarization factors that need to be supplemented by checking the bearing condition, providing a systematic approach to checking electrical machines.
Authors and Affiliations
Vyacheslav Kalinichenko, Andrii Sumtsov, Natalіya Chigirik, Mykhailo Pavliuchenkov
FORMATION OF RATIONAL ROUTES FOR TRAINS ON THE RAILWAYS OF UKRAINE
The paper examined the rational organization of routes for movement passenger and freight trains on the railways of Ukraine. In modern conditions in rail-based passenger and freight traffic are not effective transportati...
PLANNING OF PASSENGER TRAIN DEPARTURE TAKING INTO ACCOUNT THE CONDITIONS AND STRUCTURE OF THE MARKET OF TRANSPORT SERVICES
Improving the competitiveness of rail transport in the field of passenger transport is possible by increasing the speed of movement of passenger transport and the quality of services provided. With the growth of mobility...
ANALYSIS OF SCHEME OF COMPENSATION OF REACTIVE POWER IN THE SYSTEM OF TRACTION POWER SUPPLY
The article analyzes the existing methods and systems of reactive power compensation in the traction power supply system. The problem of reactive power compensation has always occupied an important place in shaping the e...
INFLUENCE OF COEFFICIENT OF EXPANSION THE GRAINS OF RUBBLE BY A SOLUTION ON CEMENT CONCRETE FLEXURAL STRENGTH
It is shown that one of the important factors affecting on the flexural strength of cement concrete is a packing density, or the ratio between the large and small filler. The article shows that different aggregates has i...
NUMERICAL INVESTIGATIONS OF DYNAMIC TRANSVERSE FORCES IN CURVES, IN THE ZONES OF RAILS VARIETIES
The purpose of the work is to identify, by numerical methods, the causes of intensive lateral wear of rails and other bounces of the track in curves of small radius. The research has been carried out for the most mass ty...