SELECTION OF THE COMPUTATIONAL MODEL OF WIND FLOW IN THE PROBLEMS OF COMPUTATIONAL ARCHITECTURAL AND CIVIL ENGINEERING AERODYNAMICS IN ACCORDANSE WITH REGULATORY AND TECHNICAL DOCUMENTS
Journal Title: International Journal for Computational Civil and Structural Engineering - Year 2019, Vol 15, Issue 1
Abstract
An overview of the main directions of numerical simulation of problems of architectural and civil engineering aerodynamics based on Computational Fluid Dynamics (CFD) is presented. The main advantages of numerical simulation in comparison with traditional methods of aero-physical modeling in wind tunnels are highlighted. The basic principles of numerical simulation of wind loads and actions on buildings and structures are outlined. In modern practice, numerical modeling by finite volume method is used with the decomposition of the velocity of the turbulent wind flow into the average and pulsation component within the averaged by Reynolds solution of Navier-Stokes equations using the semi-empirical turbulence model k-ш SST. In practice, the problem of the legitimate (in accordance with the requirements of building codes) selection of a computational model of wind flow is very important. This is equivalent to the assignment of boundary conditions within numerical simulation. The computational model of the wind, presented in the Russian building codes, requires additions to solve the problems of numerical simulation of architectural and civil engineering aerodynamics. A detailed comparison of the computational models of wind flow in Russian and foreign building codes is carried out. The following wind flow parameters are analyzed: the profile of the average wind speed, the profile of the intensity of turbulence, the profile of the scale of turbulence. A table of correspondence of terrain types according to the classification of Russian and foreign codes is proposed. The possibility of determining the parameters of the computational wind flow model based on the joint use of building codes in force in Russia and Belarus is shown. A set of measures is proposed with the goal of creating a regulatory and technical environment for the practical application of computational architectural and civil engineering aerodynamics in real design.
Authors and Affiliations
Andrei Deineko, Aleksey Shamshurin, Narek Kazaryan
Keywords
Related Articles
- EP ID EP576903
- DOI 10.22337/2587-9618-2019-15-1-14-28
- Views 85
- Downloads 0
РАСЧЕТ ОГНЕСТОЙКОСТИ СТАЛЬНЫХ КОНСТРУКЦИИ
Приводятся сведения об особенностях программной реализации модулей расчета стальных конструкций на огнестойкость. Методика расчета следует указаниям Еврокода. На примере демонстрируется роль вторичных эффектов и показыва...
МОДЕЛИРОВАНИЕ АЭРОДИНАМИЧЕСКОЙ НЕУСТОЙЧИВОСТИ СТРОИТЕЛЬНЫХ КОНСТРУКЦИЙ НА ПРИМЕРЕ СЕЧЕНИЯ МОСТА ЧАСТЬ 1: ОЦЕНКА АЭРОДИНАМИЧЕСКОЙ НЕУСТОЙЧИВОСТИ СЕЧЕНИЯ ИНЖЕНЕРНЫМИ МЕТОДАМИ
Данная статья посвящена оценке аэродинамической неустойчивости мостовых конструкций. В ходе численного моделирования были получены аэродинамические характеристики, которые были использованы для оценки аэродинамической не...
MODELLING OF SOIL BEHAVIOR IN DYNAMIC LOAD
The paper focuses on simulation of dynamic “structure – soil” interaction and unbounded soil halfspace.Principles for new finite elements developed in LIRA-SAPR software are described. These finite elementssimulate the i...
NUMERICAL AND EXERIMENTAL MODELING OF RIGID JOINT OF LAYERED WOODEN STRUCTURES
The article deals with the problems of modeling and solving contact problems in the ANSYS software complex using the example of calculating the rigid joint of a glued wooden beam. Comparative calculation data for a conti...
КИНЕТИКА СТРУКТУРНЫХ ПРЕВРАЩЕНИЙ ПРИ ФОРМИРОВАНИИ ПОР В ПРОЦЕССЕ ВЫСОКОТЕМПЕРАТУРНОЙ ОБРАБОТКИ ПЕНОСТЕКЛА
В работе показаны ключевые моменты, применяемые при моделировании процесса формирования и роста пор в структуре пеностекла. Пора представляется как единичный центр роста радиуса с внешней границей сферической формы и с з...