Simulation model of instantaneous electrical and power parameters of mode and quality of electricity for DC traction power systems
Journal Title: Праці Одеського політехнічного університету - Year 2017, Vol 1, Issue 51
Abstract
The nature of the electricity consumption in TPS makes the loading of traction substations. On the basis of previous studies of qualitative characteristics of the DC traction power system, the shortcomings related to work of driven power transformers at DC substation and at the electric locomotives were identified. Thus, further increasing of electric railway equipment with adjustable converters sets the problem to investigate the influence of its work on the magnitude of harmonic of voltage and current in the catenary system. Aim: The aim of this research is to develop a simulation model of instantaneous electrical and power parameters of mode and quality of electricity for DC traction power systems under conditions of current distortion. Materials and Methods: Using the methods of the theory of electrical engineering, the model for continuous calculation of instantaneous mode parameters of the DC traction power systems is developed. Results: Based on the analysis of the structure of modern traction electric part of electric locomotives that get energy via DC catenary system, we found that the electricity regime may be described qualitatively only considering the higher harmonic settings of the operation mode. Influence of parameters of a catenary system, due to the presence of harmonic components in the current and voltage requires consideration in the calculation regime the effective resistance as well as the inductance of circuit elements. The obtained results can be used in the formation of the requirements for electricity metering at sites of railways where operated electric locomotives with traction electrical complex, which has a semiconductor converters.
Authors and Affiliations
Yu . O. Slobodenyuk, O. V. Bialobrzeski, T. O. Smirnova
Keywords
Related Articles
- EP ID EP316724
- DOI 10.15276/opu.1.51.2017.13
- Views 147
- Downloads 0
Autopilot model for returning an unmanned aerial vehicle to its starting point in case of electromagnetic noise
The possibility of returning an unmanned aerial vehicle in case of electromagnetic interference, which blocks the use of the global positioning system and radio control system, is considered. It has been shown that in th...
Improving the reliability of pulsed laser rangefinder and infrared devices of homing and surveillance by final electron beam processing of their optical components
To prevent the negative impact of external thermal actions on reliability of devices for measurement and thermal testing of objects of various physical nature the practical importance has electron beam processing of surf...
The properties of time-frequency localization of basis functions used in OFTDM communication systems
This article investigates the properties of time-frequency localization (TFL) of various basis functions, such as rectangular function, the function of half cosine, isotropic orthogonal transform algorithm (IOTA) functio...
Fracture resistance of shell-steel reactor steel with mixed deformation modes for justification of extension of nuclear power plants lifetime
Preliminary thermomechanical loading promotes increase of resistance to brittle fracture of heat-resistant steels with fractures and is the fundamental basis of the perspective method of increasing the resource for ensur...
Obtaining solutions of silver nanoparti-cles under plasma discharge
The paper considers obtaining water solutions of silver nanoparticles with contact non-equilibrium low tem-perature plasma discharge. The aim of the work is to study the influence current of a discharge non-equilibrium l...