Stiffness determination of the controlled wheel module of a two-axle vehicle
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2016, Vol 77, Issue 2
Abstract
The conditions of a secure loss of stability of a two-axle wheel vehicle with absolutely hard steering have been found before. The analytically derived conditions of a secure stability loss in case of torsional stiffness are dependent on the relationship between the slipping resistance coefficients, the transverse clutch coefficients on the axes, and the torsional stiffness of the controlled wheel module. In this case, the trail distance is taken into account in the wheel module control system, the mass of the module being neglected. The approach suggested in the paper does take into account the mass of the controlled wheel module. The slipping forces are presented accurate to a cubic term of expansion in slipping angles. The torsional stiffness intervals have been found that provide a secure loss of stability of a two-axle wheel vehicle model. The intervals have been obtained on the basis of a bifurcation analysis of actual bifurcations of the stationary states in the vicinity of the rectilinear motion of the model. Diagrams that illustrate the fulfillment of secure stability loss conditions and allow using the results obtained in designing a wheel module are presented in the paper. The technique used is alternative to the well-known M. Bautin’s approach to determination of secure-insecure conditions in case of a divergent loss of stability.
Authors and Affiliations
N. V. Belevtseva, V. H. Verbytskyi, V. H Khrebet, V. S. Tarasyuk
Keywords
Related Articles
- EP ID EP253819
- DOI -
- Views 120
- Downloads 0
Interaction of energy-material flows in gas-liquid environments
The article deals with the features of the flow of energy-material transformations in sugar-containing environments of anaerobic fermentation. Endogenous processes - the synthesis of carbon dioxide, the synthesis of ethy...
Computational analysis of the temperature improvement of electric asynchronal motors
In the development of electric machines as a whole, as well as asynchronous motors, in particular, the limit values of temperature are the key factors that affect the efficiency of the overall design. Since the usual loa...
Investigation of the influence of the metal excipient of the termite charge on the qualitative parameters of the alloy, deposited by the IMS method
For surfacing the coating on the surface of metal products, welding is usually used. This process is time-consuming, takes a lot of time and does not allow you to simultaneously receive connections across the entire prod...
Study of the action of blast deck charge in rocky soils
Blasting (B) in the industry, including the mining extraction of minerals, are carried out mostly with the use of blasthole charges that systematically distributed on the block that is undermined, by individual groups. T...
Digital signals processing using non-linear orthogonal transformation in frequency domain
The rapid progress of computer technology in recent decades led to a wide introduction of methods of digital information processing practically in all fields of scientific research. In this case, among various applicatio...