STRESS IN CONTACT AREA OF GEAR TEETH WITH COATINGS DEPOSITED ON ELASTIC SUBSTRATE
Journal Title: Tribologia - Year 2012, Vol 244, Issue 4
Abstract
Due to the increased interest amongst teeth gear manufacturers for an adequate method of controlling the stress field, this paper presents an analysis of the applicability of the Hertz theory to the case of the contact of elements with coated material. The proposed method to determine the contact stress field in this case of contact was developed based on the classic Hertz theory and a specific numerical model. The gradient of hardness and elastic modulus in the material of the surface layer was measured by indentation. The following assumptions were made: the graded surface layer adheres perfectly to the substrate, the properties of surface layer material in the same distance from the surface are the same, the thickness of surface layer of the both surfaces in contact is the same, and the contact is without sliding. The results show that, by extending the combination of numerical experiments, the Hertz theory can be applied to the case of layered materials.
Authors and Affiliations
Michał Rusinek, Wiesław Rakowski
Keywords
Related Articles
- EP ID EP270430
- DOI -
- Views 56
- Downloads 0
SURFACE RANDOM PARAMETERS FOR ENDOPROSTHESIS LUBRICATION
Within the last ten years in the European Union the number of bone fractures caused by the osteoarthritis increased twofold. More than 100000 hip or knee joints in total have been implanted in Germany during one year. Wi...
Charakterystyki tribologiczne APT-T5W w aspekcie różnych węzłów tarcia i rodzajów ruchu
Celem artykułu jest przedstawienie właściwości tribologicznych powłok tlenku aluminium, które zostały wytworzone na stopie aluminium EN-AW-5251 metodą anodowania twardego. Powłoka tlenkowa posiada włóknistą strukturę i p...
ZNACZENIE BŁĘDÓW USTAWIENIA OPRAW ŁOŻYSKOWYCH WAŁU TRZYPODPOROWEGO DLA TRWAŁOŚCI ŁOŻYSKOWANIA
W układach napędowych maszyn i urządzeń bardzo często występują długie wały napędowe, które wymagają osadzenia na kilku podporach. Dlatego też ustalenie wpływu dokładności wykonania i montażu oraz warunków pracy łożysk n...
SCUFFING AND PITTING OF A STEEL FRICTION JOINT WITH LOW FRICTION PVD COATED ELEMENTS
The paper presents the test results of scuffing and the surface fatigue life (pitting resistance) of the modified four-ball tester friction joint, lubricated with the following oils: RL219 reference oil, PAO 8 poly-alfa-...
OPERATING CONDITIONS OF SLIDE BEARINGS OF MILLS USED IN KGHM POLSKA MIEDŹ S.A.
The paper contains the results from a technical analysis of the conditions of the operation of hydrodynamic bearings supporting the drums of ore processing mills at KGHM Polska Miedź S.A. A theoretical analysis was perfo...