STRUCTURAL DESIGN OF BIOMASS CONTINUOUS FERMENTATION SYSTEM
Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1
Abstract
A continuous biomass fermentation system, in particular an anaerobic continuous fermentation system with agricultural straw as a carbon source. After the culture medium and biomass material storage tank configuration is completed, solid-liquid ratio by controllably shaftless screw feed device into the anaerobic fermentation tank fermentation. The anaerobic fermentation tank is a flexible structure that is squeezed by external forces to achieve material mixing. Since the biomass is in the form of particles, in order to increase the fermentation efficiency, the biomass is fed into the grinding device during fermentation and re-enters the fermenter after grinding. At the end of the fermentation, most of the residue will be squeezed out of the tank and a small part will remain at the bottom of the tank as a seed. New substrate will be fed into the feeder tank, to achieve efficient continuous fermentation of biomass
Authors and Affiliations
Hou Zhe sheng, Fang Yan Zhao, You Yi
Keywords
Related Articles
- EP ID EP414956
- DOI 10.26480/icnmim.01.2018.431.432
- Views 69
- Downloads 0
THEORETICAL STUDIES ON THE STRUCTURES AND SPECTROSCOPIC PROPERTIES OF IR COMPLEXES WITH THE BIPYRIDYL-PHENYLENEDIAMINE LIGAND
The phosphorescent iridium(III) complexes (N^C)2Ir(bpy-D) (bpy-D = 4-(N-(2-amino-5- methoxy- phenyl)aminomethyl)-4’-methyl-2,2’-bipyridine: N^C = F-ppy(1), ppy(2), pq(3) , pqe(4); F-ppy = 2-(2,4-difluorophenyl)pyridine,...
PREPARATION OF MAGNETIC ZR-PILLARED BENTONITE AND ITS APPLICATION IN CONGO RED REMOVAL
The magnetic bentonite material (Zr-B-Fe3O4) was prepared by a solvothermal reaction. The received Zr-B-Fe3O4 had the advantage of pillared bentonite and magnetic Fe3O4. It can be separated easily under an external magne...
DYNAMIC PROCESS MODELING AND SIMULATION OF SHELL-AND-TUBE HEAT EXCHANGER
Heat exchangers are commonly used to exchange heat in industrial production. According to the law of energy conservation, the characteristics of shell-and-tube heat exchanger were analyzed and the dynamic model was estab...
PREPARATION AND PROPERTIES OF SELF-EMULSIFIED CATIONIC WATERBORNE EPOXY RESIN MODIFIED SIZING AGENT
This article reports a preparation and properties of self-emulsified cationic waterborne epoxy modified resin as a film former of sizing agent. There were two major steps to prepare cationic waterborne epoxy modified emu...
ONLINE SIMULATION OF SHELL-AND-TUBE HEAT EXCHANGER BASED ON CONFIGURATION SOFTWARE
Taking the shell-and-tube heat exchanger as the research object, based on the conservation of energy, the dynamic mathematical model of the heat exchanger is established through the mechanism analysis method. Using confi...