Studies of Efficiency of Tie Rod Usage for Masonry Wall Strengthening
Journal Title: Металлические конструкции - Year 2018, Vol 24, Issue 3
Abstract
In the paper the influence of nontensional horizontal steel tie rods installation in a building perimeter on vertical and horizontal deformations of bearing walls of stone buildings is considered. Buildings of large blocks and bricks, loaded with constant and temporary loads were taken as initial data. By the way of the special effects it has been given ground vertical shifts which are accorded to mould radii of displacement through underworking. The stress-strain state of buildings was determined on the basis of numerical calculations using 3D models. The dependence of wall deformations from an area of ties to be installed at each floor level was obtained. For generalization the values of deformations were received as a function of an uneven relative settlement. It has been determined that the horizontal deformations is reducing up to 1,5…2,5 times (efficiency factor of 0,67…0,4) while a relative settlement does not exceed of 0,004. The research has demonstrated a usage of untensioned tie rods to be not effective in all for masonry wall strengthening.
Authors and Affiliations
Vadim Gubanov, Yana Zikii, Alina Pchelenko
Keywords
Related Articles
- EP ID EP536603
- DOI -
- Views 93
- Downloads 0
Stress-Strain State of a Structural Construction with Allowance for Fastening elements
The article presents the results of the calculation of the nodal connection of the spatial block of the structural covering of an industrial building. A detailed technique for performing the calculation of a junction con...
Numerical Studies of the I-Beam Floor Beam of 4th Class of Section According to Eurocode 3
In the article numerical investigations of the beam of I-beam cross-section according to Eurocode 3 have been given: «Steel structures» [1]. The I-beam section beam is produced as an element of the general 4th class, in...
Comparative Analysis of the Efficiency of Structural Solutions of Large-Span Coverage on the Curvilinear Plane
The article presents an analysis of the influence of various design solutions on the spatial work of long-span coverage. The results of numerical studies of the rational constructive solution both on the basis of efforts...
The Choice of Rational Parameters of Frames of Variable Rigidity, While Using Genetic Algorithm Optimization
The article deals with the use of the genetic optimization algorithm for selecting rational parameters of variable-rigidity metal frames (variable cross-section). An example of the simplest genetic algorithm on the block...
The Method of Determination of Mounting Stress-Strain State-Span Hinge-Rod Metal Coatings
The article made overview previous studies in installation loads and geometrical deviàtions. The article shows the methodology and findings of the mounting stress-strain state-span hinged-rod metal coating by taking into...