STUDY OF TECHNICAL STATE IMPACT OF BRAKE RETARDERS AT THE PROCESSING ABILITY OF HUMPS
Journal Title: Наука та прогрес транспорту - Year 2016, Vol 0, Issue 4
Abstract
Purpose. The research aims development of methods for calculating the estimated capacity humps for the loss conditions of brake power retarders. Methodology. The operation of humps is connected with large number of random factors, such as the characteristics of cuts, environmental conditions, the value of braking power implemented by retardants and others. In this regard, to research the set tasks the methods of simulation modeling and mathematical statistics are used. Determination of speed and motion time of cuts on the routes is carried out on the basis of rolling down modeling of their rolling down from the humps. Findings. If the brake power of retarders of the rolling down part of humps is not enough to stop the cuts, it should be provided the intervals during break-up to release the rolling routes from the preliminary cuts. The dependencies allowing to set the duration of these intervals were determined using the methods of the probability theory If the brake power of retarders at the rolling down part of humps and at the classification tracks is not enough to meet the requirements of the aimed regulation of the cuts rolling speed, it is necessary the use the additional brake shoes. The work develops the methods that on the basis of simulation modeling of the humping process allow one to set the desired value of the break-up duration increase. They ensure the traffic safety at the given number of car motion speed regulators. Originality. Authors firstly proposed the improved methods for determining the estimated capacity of humps. Unlike the existing ones, allow taking into account the technological limitations caused by the requirements of the humping process safety and can be used to assess the performance of the humps in the conditions of parametric failures of the retarders. Practical value. The use of the proposed methods allows assessing the influence of the retarders’ disrepair on the performance degradation of humps for the existing volumes of work.
Authors and Affiliations
D. M. Kozachenko, S. V. Grevtsov, T. V. Bolvanovska
Keywords
Related Articles
- EP ID EP225335
- DOI 10.15802/stp2016/77878
- Views 117
- Downloads 0
DYNAMIC BEHAVIOR OF TWO-SPAN CONTINUOUS CONCRETE BRIDGES UNDER MOVING OF HIGH-SPEED TRAINS
Purpose. The scientific work provides a comparison of the results of the movement of a high-speed passenger train across the bridge, obtained as a result of finite element modeling in the SAP2000 software package, and re...
OUTLOOKS OF USING DBN B.2.6-161:2017 «WOODEN STRUCTURES» IN DESIGN PRACTICE
<p class="Vis"><strong>Purpose</strong><strong>.</strong> From 01.02.2018, the new state standards DBN B.2.6-161:2017 were introduced into the wooden structures design practice. They replace the recently prepared codes D...
ДИНАМІКА РОЗВИТКУ, СУТНІСТЬ ТА ГАЛУЗЬ ЗАСТОСУВАННЯ ПРОСТОРОВИХ СТРУКТУРНО-ВАНТОВИХ СТАЛЕЗАЛІЗОБЕТОННИХ КОНСТРУКЦІЙ
Мета. У будівництві існує проблема, яка пов’язана з трудомісткістю робіт та перевитратами матеріалів у наслідок їх нераціонального використання. Це відбувається у наслідок низки причин, у тому числі невідповідність сучас...
INFLUENCE OF THE LONGITUDINAL AND TRANSVERSE DISPLACEMENT OF THE CARGO GRAVITY CENTER IN GONDOLA CARS ON THEIR DYNAMIC INDICATORS
Purpose. Increase in the movement speed of railway vehicles makes it possible to strengthen integration processes with the countries of Europe and Asia and leads to the need to improve control, to quantify the dynamic lo...
ВЛИЯНИЕ ПОЛИМЕРНОЙ ОСНОВЫ НА СВОЙСТВА РЕЗИНОВОЛОКНИСТЫХ КОМПОЗИТОВ
Цель. В данной работе предполагается исследовать влияние каучуков общего и специального назначения в качестве полимерной матрицы на жесткостные, прочностные свойства резиноволокнистых композитов и их сопротивление теплов...