Study of the Sulfur Trioxide Generation Mechanism and Control Method Using Wet Solution
Journal Title: International Journal of Engineering and Science Invention - Year 2017, Vol 6, Issue 1
Abstract
In coal fired power plant, especially using sulfur content fossil fuels, much attention in recently paid to sulfur trioxide and sulfuric acid mist emission, because conventional desulfurization system should not be removed, which is installed to meet air quality standard for sulfur dioxide. Sulfur trioxide is highly reactive with water vapor and generally convert to sulfuric acid mist in atmosphere. Sulfuric acid is very fine under-submicron sized particulate matter or droplets. Recently sulfur trioxide cause air pollution and public health, discussion comes out, especially in the United States and Japan, that regulations and guideline should be enlarge the sulfur dioxide to sulfur trioxide and sulfuric acid. Moreover most countries reinforce sulfur oxides emission regulations or guidelines from coal-fired power plant. In this study, focusing that how to control the sulfur trioxide and sulfuric acid mist. Sulfuric acid mist found depending on the flue gas temperature. Generation and conversion rate of sulfur trioxide were measured according to temperature. The absorbent was selected to remove sulfur trioxide and sulfuric acid using wet type desulfurization system which the most proven technology at this moment.
Authors and Affiliations
Seung-Min Park, Eun-young Jo, Hwan Kim, Yu-Deuk Kim, Chan-gyu Parkr
Keywords
Related Articles
- EP ID EP402806
- DOI -
- Views 92
- Downloads 0
Enhanced Production of Amidotransferase From Bacillus Sp. ABP-6 By optimization of Nutritional Parameters Using Statistical Experimental Design
The consortial effects of various nutritional parameters of medium on enhanced production of amidotransferase by Bacillus sp. APB-6 were studied using stepwise statistical experimental methodology. In addition to the eff...
Impact of Micro B4C Particulates Addition on Mechanical Behavior of Al2024 Alloy Composites
In this paper an attempt made for investigating the effect of addition of B4C particulates into the Al2024 alloy. Here microstructural study of the 4 wt. percentage Boron Carbide reinforced composite is studied.90-micron...
A Survey on working with open source software testing frameworks
In software development lifecycle (SDLC), the testing phase can play an important role to ensure the quality of the software. If the testing tool is open source, we can easily install into our system and test software ap...
Mathematical Modeling Of Biogas Yield From Anaerobic CoDigestion Of Organic Waste And Pig Dung
Modeling of industrial plants and processes is commonly used for their optimization and control. Modeling is widely applied for engineering problems because of the advantages it possesses when it comes to process optimiz...
Survey Of Routing Protocols In Wireless Sensor Networks:-
wireless sensor network (WSN) technology is having capability of sensing, transmitting/receiving physical parameters which results in varied application areas. The characteristics of wireless network require cost effecti...