Study on Shrinkage Development inside an Al-Si Alloy Casting by Computer Solidification Simulation
Journal Title: RECENT - Year 2016, Vol 17, Issue 47
Abstract
We show that the position and shrinkage volume results given by software using casting solidification simulation doesn`t always correspond with the experimental results. This can be explained due to the simulation analysis the flow of liquid alloy inside casting (from casting-mould). For a better determination about position and shrinkage volume from casting, the numeric results and graphics given by software must be processed and interpreted by user at the end of simulation. In order to determine the position and shrinkage volume from casting one must analysed the time when feeding channel is interrupted, volume of liquid alloy from casting at that time and the position of the hot spot. We show this example to be verified as experimental in. In the end, we show the numeric results given by software and the steps to follow.
Authors and Affiliations
Bela VARGA, Florin MUSTEAȚĂ, Ioan CIOBANU, Tibor BEDO, Ion MUNTEANU, Aurel CRIȘAN
Keywords
Related Articles
- EP ID EP123001
- DOI -
- Views 72
- Downloads 0
Studies Regarding the Influence of Boron Addition on the Hardness and Friction Coefficient of the Mn, Mo and Cr Ecological Alloyed Sintered Steels
In this paper are presented the experimental results regarding the elaboration of the Fe-Mn-Mo-Cr-B-Graphite and Fe-Mn-Mo-Cr-Graphite ecological alloyed sintered steels. There have been produced mixes containing 3% Mn, 1...
Analytical Modeling of Turbocharger Rotors
Rotordynamics was and still is a high applicability field to all categories of rotating machines. The turbocharger is part of high precision rotating machines. Its rotor, sustained by two categories of bearings, represen...
Microstructure Evaluation of Stainless Steel Welds
This study aims to determine the optimal parameters for cold metal transfer MAG welding of stainless steel. Starting from this perspective, the filler material of ER 316LSi full wire type and a MAG CMT - Pulse regime of...
Equipment for Heat Treatment with the Use of Technologies of Super-High-Frequency and Electrical Contact Technique of Heating
The paper presents results of the development of equipment for heat treatment with the use of technologies of microwave and electrical contact methods of heating. The device for the combined frying of culinary products a...
Requirements for Ground-Based Air Defense Integrated Systems
The Air Defense (A.D.) represents a really support for any military operations. Between the A.D. assets, Surface-to-Air Missiles are the most important features in endowment, allowing dealing the rapid evolution of enemy...