Study on Vertical Coupling Vibration Law of Metro Vehicle Based on Flexible Carbody
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 5
Abstract
Objective With the increase in train operating speed and the adoption of lightweight design, the dynamic forces between the wheel-rail interface are intensified, leading to exacerbated vibrations among various components of the vehicle. This significantly affects the vehicle dynamics performance, necessitating research on vertical coupling vibration law between bogie and flexible carbody. Method Taking a certain model of metro train as the research subject, a rigid-flexible coupling model including a flexible carbody is established. The vertical vibration coupling relationship between the carbody structure mode and the bogie suspension mode is studied using the steadiness index of relevant measuring points. Result & Conclusion The results indicate that, when the bogie floating and nodding frequencies are close to the first-order bending frequency of the carbody, considering only the first-order vertical bending mode of carbody can induce a coupling resonance phenomenon between the flexible body and the bogie, with the central measuring point being the most affected. When considering only the rhomboid deformation mode and first-order torsional mode of the carbody, coupling resonance between bogie and flexible carbody will not occur, but both are influenced by track excitation resonance effect. When considering the carbody combined structure mode, the central measuring point of the carbody is most affected by the first-order vertical bending mode, leading to a coupled resonance phenomenon between the flexible carbody and the bogie. On the other hand, the carbody measuring points above the bogie are prone to be affected by first-order torsional mode, resulting in modal resonance effects at some speed levels.
Authors and Affiliations
Haiju WEI, Riyi WANG
Keywords
Related Articles
- EP ID EP735611
- DOI 10.16037/j.1007-869x.2024.05.008
- Views 47
- Downloads 0
Research on Failure Processing of Axle Counter in CBTC System
Objective The communication-based train control (CBTC) system usually uses the axle counter to provide train auxiliary positioning functions. However, in the case of axle counter failure, if it is always processed as "oc...
Cause Analysis and Solution for Vertical Damper Mounting Bolt Loosening in High-Speed Railway EMU
［Objective］ During the operation of a certain type of high-speed EMU (electric multiple units) in China, the mounting bolts at lower rubber joint of the secondary vertical damper (hereinafter referred to as the ′lower...
Influence of Vertical Ground Motion on Seismic Response of Subway Station Co-structure System
Objective The co-structure system of subway station (hereinafter referred to as 'co-structure system') realizes the connection and conversion between the box structure and the box frame structure through thick plates. Du...
Probabilistic Evaluation of Grouting Reinforcement on Settlement Control Effectiveness in Shield Tunneling Construction
［Objective］ In order to reduce the ground disturbance when the shield tunnel underpasses buildings, it is necessary to study the settlement control effect of grouting reinforcement during shield tunneling under the bui...
New Network Architecture for Urban Rail Transit Video Surveillance System Based on SDN and NFV Technologies
Objective The video surveillance system of Shanghai urban rail transit faces challenges such as insufficient flexibility, poor scalability, and complex operation and maintenance. In response, a new network architecture f...