Superior Valorisation of the Aluminium Scraps for Obtaining Complex Aluminium Master Alloys Used in Advanced Refining of Steels
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2009, Vol 32, Issue 1
Abstract
The research about aluminium scraps valorisation to obtain master alloys with reactive elements (Al, Mn, Si) used for special steels refining is presented in this paper. By this way the recycling of aluminium scraps leads to increase the recovery ratio of aluminium as scraps into new materials with added value. These are FeAl, FeMnAl, FeMnSiAl. A new technology for obtaining these materials was proposed. This solution was established to ensure reproducible results, the steadfastness of the chemical composition of alloys, a maximum recovery ratio of elements and low energy consumption.
Authors and Affiliations
Anişoara CIOCAN
Keywords
Related Articles
- EP ID EP658749
- DOI -
- Views 83
- Downloads 0
Analysis Tools for Sustainable Management of Cell Phone Waste for Metals Recovery
A modern cell phone contains over 60 metals, combined physically or chemically and in some cases covered with various types of plastics, ceramics, etc. For recycling, each metal from the device needs to be analyzed indiv...
Electrochemical Deposition and Characterization of Doped Poly (3,4-Ethylene Dioxythiophene) for Potential Use as a Biosenso
In this study, conducting polymer films of poly(3,4-ethylenedioxythiophene) (PEDOT) were electrodeposited onto a platinum electrode from an aqueous micellar medium. The electroactivity of the undoped and doped PEDOT film...
Laser Cladding of Ni-Cr-B-Fe-Al Alloy on a Steel Support
Multilayer coating by injection of powder with 8.9% Cr, 4.5% Fe, 5.1% B, 2.4% Al, 0.6% Cu; all reminded of Ni, as chemical composition, in melted bath by CO2 continuous wave laser connected to x-y-z coordinate table was...
Comparative Corrosion Behavior of Pure Copper and Brass in 3.5% NaCl Solution
Copper and brass are used in many economic sectors as electrical, construction, transport and others. From common household electrical wiring to boat propellers and from photovoltaic cells to saxophones, copper and its a...
Establishing the Rolling - Friction Coefficient for Different Contacts Between Balls and Termochemicallly Treated Steel Rolling Paths
Within the frame of this work, the influence of four very well-known and often used thermochemical treatments (carburizing, carbonitriding, nitriding and nitrocarburizing) of steel rolling paths applied on rolling-fricti...