Surface Roughness Assessment of Woven Fabrics Using Fringe Projection Moiré Techniques
Journal Title: Fibres and Textiles in Eastern Europe - Year 2015, Vol 23, Issue 3
Abstract
In this paper, a new approach is proposed for characterizing the surface roughness of woven fabrics. This approach is based on the fringe projection moiré techniques and analysis of the moiré pattern, which is caused by the interaction between the Ronchi grating and the periodic structure of a woven fabric. In this study, an image processing procedure was employed and a new parameter called the “roughness index” was defined for quantifying the surface roughness. The results obtained from the moiré technique were validated by a set of pair-comparison subjective tests. The proper correlation, with an average R-squared value of 0.9087, between subjective and objective tests confirmed the accuracy, correctness and efficiency of the new method. Statistical analysis of the roughness results clarified that the effect of fabric structural parameters such as the weave structure and weft density is significant in the confidence range of 95%.
Authors and Affiliations
Nazanin Ezazshahabi, Mohammad Tehran , Masoud Latifi , Khosro Madanipour
Keywords
Related Articles
- EP ID EP68975
- DOI -
- Views 100
- Downloads 0
Discoloration of Cotton/Kapok Indigo Denim Fabric by Using a Carbon Dioxide Laser
In this work, a carbon dioxide laser was used for the color-fading treatment of cotton/kapok denim fabrics. The results were analysed thoroughly and compared with those of cotton denim fabric and PET denim fabric. Result...
Fabrication of Electrical Conductivity and Reinforced Electrospun Silk Nanofibers with MWNTs
Electrospinning is an effective technique for fabricating submicron to nanoscale fibers from synthetic polymer as well as natural proteins. In this study, multiwalled carbon nanotubes (MWNTs) were embedded via electrospi...
Changes in the Specific Charge Amount on the Surface of Cotton Fibres during the Alkali Pre-treatment Process
The aim of the pre-treatment process is to prepare cotton fabrics for subsequent technological operations, which are, in the majority, carried out in aqueous solutions. The pre-treatment processes modify, to some extent,...
Wielokanałowy optyczny system do kontroli jakości druku cyfrowego
Czynniki ekonomiczne oraz ochrona środowiska odgrywają kluczową rolę w nowoczesnej technice barwienia materiałów tekstylnych, w której barwniki są nakładane w procesie przypominającym drukowanie. Poza dowolnie zaprojekto...
Badanie wpływu wysokości okrywy i masy liniowej przędzy na właściwości użytkowe dzianin z okrywą pętelkową i pętelkową ciętą
Praca przedstawia badania wpływu parametrów strukturalnych dzianiny takich jak masa liniowa przędzy okrywy i przędzy podstawowej (90 i 70 tex) i wysokości płaszczek na właściwości dzianin z okrywą pętelkową i pętelkową c...