Synthesis of 2,4-dinitrophenylhydrazine loaded sodium dodecyl sulfate-coated magnetite nanoparticles for adsorption of Hg(II) ions from an aqueous solution
Journal Title: UNKNOWN - Year 2016, Vol 3, Issue 4
Abstract
Background: The rapid increase in agricultural and industrial development has made heavy metal pollution a serious environmental problem and public health threat; therefore, removal of heavy metals from water is important. The current study prepared DNPH@SDS@Fe3O4 nanoparticles as a novel and effective adsorbent for removal of Hg(II) ions from an aqueous solution. Methods: A selective adsorbent for Hg(II) was synthesized by coating Fe3O4 nanoparticles with sodium dodecyl sulfate which was further functionalized with 2,4-dinitrophenylhydrazine (2,4-DNPH). The synthesized nanoparticles were characterized by Fourier transform infrared spectroscopy (FTIR), x-ray diffraction (XRD), scanning electron microscopy (SEM) and SEM–EDXSt. The effects of pH, dose of adsorbent and shaking time on adsorption capacity were investigated. The kinetics and equilibrium of adsorption of the metal ions were thoroughly studied. Results: SEM showed that the size of the nanoparticles was 20 to 35 nm. The maximum adsorption capacity for Hg(II) was 164.0 mg g-1 for an adsorbent dose of 0.04 g at pH 7.0, 25°C and the initial metal concentration was 25 mg L-1,which was greater than for most adsorbents previously examined for Hg(II) adsorption. Adsorption experimental data showed good correlation with the pseudo-secondorder model and Langmuir isotherm model. Conclusion: The results indicated that the DNPH@SDS@Fe3O4 nanoparticles are an efficient adsorbent for removal of heavy metal from wastewater.
Authors and Affiliations
Soheil Sobhanardakani
Baffle and fixed media effects on coliform removal and bacterial die-off rate coefficient in waste stabilization ponds (a case study in Ahvaz)
Background: The use of waste stabilization ponds is one of the cheapest wastewater treatment processes. This study evaluated the effects of baffles and fixed media on coliform removal in facultative lagoons. Methods: In...
Ecological risk assessment of heavy metals from cement factory dust
Background: The release of metals from industrial factories is one of the most important sources of environmental pollution. The present study aimed to determine the concentration of heavy metals like cadmium (Cd), chrom...
Sonochemical degradation of azithromycin in aqueous solution
Background: The presence of pharmaceutical substances and their residual in water resources is an important environmental concern. Azithromycin, an antibiotic that is used for the treatment of infectious diseases, is a p...
Modeling of CO and NOx produced by vehicles in Mashhad, 2012
Background: In large cities, the share of vehicles in air pollutants emissions is nearly 70% that is mainly due to use of fossil fuels. Environmental simulation has many advantages such as accuracy and speed of modeling....
Comparing the ZnO/Fe(VI), UV/ZnO and UV/Fe(VI) processes for removal of Reactive Blue 203 from aqueous solution
Background: Wastewater contaminated with dyes such as Reactive Blue 203 can produce a lot of health problems if it is released into the environment without a suitable treatment. Although there are several studies on dye...