SYSTEM FOR AUTOMATIC SELECTION OF THE SPEED RATE OF ELECTRIC VEHICLES FOR REDUCING THE POWER CONSUMPTION
Journal Title: Наука та прогрес транспорту - Year 2017, Vol 0, Issue 3
Abstract
Purpose. The work is aimed to design a system for automatic selection of the optimal traffic modes and automatic monitoring of the electric energy consumption by electric transport. This automatic system should provide for the minimum energy expenses. Methodology. Current methodologies: 1) mathematical modeling of traffic modes of ground electric vehicles; 2) comparison of modelling results with the statistical monitoring; 3) system development for automatic choice of traffic modes of electric transport with minimal electrical energy consumptions taking into account the given route schedules and the limitations imposed by the general traffic rules. Findings. The authors obtained a mathematical dependency of the energy consumption by electric transport enterprises on the monthly averaged environment temperature was obtained. A system which allows for an automatic selection of the speed limit and provides automatic monitoring of the electrical energy consumption by electric vehicles was proposed in the form of local network, which works together with existing GPS system. Originality. A mathematical model for calculating the motion curves and energy consumption of electric vehicles has been developed. This model takes into account the characteristic values of the motor engine and the steering system, the change of the mass when loading or unloading passengers, the slopes and radii of the roads, the limitations given by the general traffic rules, and other factors. The dependency of the energy consumption on the averaged monthly environment temperature for public electric transport companies has been calculated. Practical value. The developed mathematical model simplifies the calculations of the traffic dynamics and energy consumption. It can be used for calculating the routing maps, for design and upgrade of the power networks, for development of the electricity saving measures. The system simplifies the work of the vehicle driver and allows reducing the energy consumption, also provides for an automatic energy cost monitoring. The calculated dependency of the energy consumption on the environment temperature may be used for an improvement of methods which regulate the work of the public electric transport companies. It has been proved that there is a possibility for reducing electrical energy consumption by 10% to 45% using the efficient motion regimes. Author’s certificate was obtained for the invention of the system for an automatic selection of the velocity regime for a public electric transport vehicle.
Authors and Affiliations
K. O. Soroka, T. P. Pavlenko, D. A. Lychov
Keywords
Related Articles
- EP ID EP230146
- DOI 10.15802/stp2017/104360
- Views 94
- Downloads 0
ДОСЛІДЖЕННЯ ДЕФОРМАЦІЙНИХ ХАРАКТЕРИСТИК ҐРУНТОВОГО МАТЕРІАЛУ З ВИКОРИСТАННЯМ ВІДХОДІВ
Мета. Для підвищення екологічної чистоти все частіше кондиційні будівельні матеріали замінюють відходами виробництв. Це стосується як металургійних шлаків, так і активного мулу станцій біологічного очищення міських стічн...
ENERGY SAVING DURING OPERATION OF EQUIPMENT WITH NON-CONTROLLED ELECTRIC DRIVE IN LOCOMOTIVE DEPOT
Purpose. To conduct research of electric motors in order to obtain the results that will assess the degree of energy saving due to electric loss reduction in the equipment with non-controlled electric drive. Methodology....
ENHANCING THE OPERATIONAL EFFICIENCY OF DIRECT CURRENT DRIVE BASED ON USE OF SUPERCONDENSER POWER STORAGE UNITS
Purpose.The scientific work is intended to analyse the expansion of the load range and the implementation of regeneration braking (RB) of the direct current drive by using the supercondenser power storage units. Methodol...
ДОСЛІДЖЕННЯ ОСАДЖЕННЯ ДОМІШОК У ГОРИЗОНТАЛЬНОМУ ВІДСТІЙНИКУ
Мета. Осадження домішок є найбільш простим та широковживаним методом механічної очистки природних або стічних вод. Цей процес реалізується, зокрема, в горизонтальних відстійниках, які є одним із найважливіших елементів у...
УМОВИ ЗАБЕЗПЕЧЕННЯ ЯКОСТІ ВІДНОВЛЕНИХ НАПЛАВЛЕННЯМ ЗАЛІЗНИЧНИХ КОЛІС
Мета. В роботі передбачається встановити закономірності формування структури і фізико-механічних властивостей колісних сталей при дуговому наплавленні та розробити технологічні рекомендації щодо відновлення поверхонь зно...