SYSTEM OF ELECTROCHEMICAL PROTECTION AGAINST CORROSION WITH ADAPTATION TO CHANGE ELECTROTECHNICAL PARAMETERS OF PROTECTION OBJECT
Journal Title: Електромеханічні і енергозберігаючі системи - Year 2018, Vol 4, Issue 44
Abstract
Purpose. It has been established that the desired operating point of the active corrosion protection system can be achieved by forming the corresponding frequency spectrum of the output signal of the cathodic protection station. Methodology. An algorithm has been developed for determining and calculating the operating point of an active corrosion protection system for an underground metal pipeline, considering the factors contributing to a change in the electrical parameters of its replacement circuit. Originality. The working point is formed both by voltage control channels and by forming a certain frequency spectrum of the output voltage of the cathodic protection station using standard switching control laws for the power elements of the cathodic protection station. The minimum permissible bit width of the digital information channel of the automatic control system of the switching modes of the power elements of the cathodic protection station is substantiated. Practical value. The result obtained makes it possible to create channels for receiving and transmitting information from the system of automatic control of the corrosion protection process.
Authors and Affiliations
Oleksandr Aziukovskiy, Michael Rogoza, Serhii Yakimets
Keywords
Related Articles
- EP ID EP660075
- DOI 10.30929/2072-2052.2018.4.44.60-67
- Views 131
- Downloads 0
INVESTIGATION OF QUASI-OPTIMAL CONTROL OF SPEED OF FREQUENCY REGULATORY-DRIVEN ASYNCHRONOUS ENGINE IN START-BRAKING MODES
Purpose. To carry out research in the part of refinement of mathematical dependence for the description of quasioptimal control, to develop an universal engineering technique for calculating engine tachograms for a given...
CUTTING POWER STABILIZATION SYSTEM WITH A FRACTAL INTEGRAL-DIFFERENTIATION REGULATOR
Purpose. To analyze the possibilities and ways of implementing fractional integral-differential regulators for optimization the dynamic and static parameters of closed loop stabilizing the cutting power systems of machin...
LABORATORY STAND FOR INVESTIGATION OF OPERATING MODES OF THE FAN SYSTEM
Purpose. The work is devoted to the synthesis of the complex laboratory stand, intended for research of the energy and pressure characteristics of a centrifugal fan unit. The element base of the stand consists of equipme...
DEVELOPMENT TRENDS AND IMPROVEMENT WAYS OF A WIND TURBINE SIMULATION SYSTEMS
Purpose. To systematize the approaches to synthesis of wind turbine simulators and to develop the recommendations for the improvement of these systems. Methodology. Based on a comprehensive literature review, the general...
REACTIVE POWER CONSUMPTION OF A SIX-PHASE INDUCTION GENERATOR
Purpose. The purpose of this work is to estimate reactive consumption of a six-phase induction generator in comparison with three-phase induction generator at identical conditions. Methodology. Theoretical research of th...