The analysis of machine operation and equipment loss in ironworks and steelworks
Journal Title: UNKNOWN - Year 2017, Vol 17, Issue 4
Abstract
The article presents a case study of the identification and analysis of operating and equipment losses in a steel plant. Losses may be visible in costs resulting from premature wear of machine and equip-ment components, removal of emergency failures related to quality losses, including loss of reputa-tion of a reliable supplier, as well as losses related to production, especially in the case of continuous production. The analysis of losses was based on the cost criterion, including losses resulting from the loss of a potential client. The real data from the 2016 were used in the case study. In order to ensure proper operation at the finishing department, standard solutions have been developed. The analysis of losses was based on the Pareto principle and the analysis of TPM coefficients.<br/><br/>
Authors and Affiliations
Adrian Maszke
Keywords
Related Articles
- EP ID EP518457
- DOI 10.30657/pea.2017.17.10
- Views 54
- Downloads 0
Prediction of fatal accidents in Indian factories based on ARIMA
The inherent benefits of an accident prevention program are generally known only after an accident has occurred. The purpose of implementation of the program is to minimize the number of accidents and cost of damages. Al...
Thermo-physical characteristics of acrylic-based building external isolation panels produced from different geologi-cal materials
Here we describe a new type of environmentally sensitive insulation panels which can be used on exterior wall surfaces to minimize all the negative aspects of existing coating materials by taking advantage of natural roc...
INFLUENCE OF MODIFCATION ON THE REFINEMENT OF PRIMARY SILICON CRYSTALS IN HYPEREUTECTIC SILUMIN AlSi21CuNi
On the paper the influence of modifying micro additives on the refinement of primary silicon crystals in the hypereutectic AlSi21CuNi piston silumin have been examined. As the modifiers there were used micro additives of...
FATIGUE LIFETIME OF 20MnV6 STEEL WITH HOLES MANUFACTURED BY VARIOUS METHODS
In this paper, the authors publish their own experimental results of the examination of the different holes (milled, drilled and drilled + shot peened) on the fatigue lifetime of 20MnV6 steel. The experi-ments were carri...
QUALITY CONTROL OF A METALLIC DENTAL BUR WITH A DIAMOND COATING
During operation, sterilization and disinfection, the surface working part of dental burs deteriorates. In this study a commercial metallic dental bur with extra coarse gradation (177-250 ยต of ceramic em-bankment), made...