The analysis of the possibility of the application of the casting waxes in the process RP
Journal Title: Archiwum Odlewnictwa - Year 2009, Vol 9, Issue 2
Abstract
The article presents analysis of possibility of application of casting waxes in process of rapid prototyping of casting models in silicone the matrices. The researches were made on casting waxes applied to the manufacturing of precise casting models and also the model system. Testing waxes are intended nominally to the processing in process of the injection. The determining of possibility processing of waxes in silicone forms was purpose of researches. Researches concerned of whole manufacturing process i.e. the preparation of the form and wax, the filling of form and also the deforming. As a result of made researches the temperature of filling of matrix was determined. The main part of research process concerned determining of temperature of deforming for every with kinds of waxes. This is especially important in case of manufacturing of casting models of precise elements, which can be destroyed easily. In this purpose researches of the bending of waxen forms were made in the range of temperature 20-37ºC. The processing parameters of casting waxes were determined as a result of made researches.
Authors and Affiliations
G. Budzik
Keywords
Related Articles
- EP ID EP70560
- DOI -
- Views 138
- Downloads 0
Mechanism of carbon influence on the transition from graphite to cementite eutectic in cast iron
In this work an analytical solution is used to explain mechanism of carbon influence on the transition from graphite to cementite eutectic in cast iron. It is found that this transition can be related to (1) the nucleati...
Microhardness and tribological wear of the steels remelted with an electric arc
This study presents results of a research on the surface strengthening of the C15, C45 and C90U steels by application of concentrated heat stream with the GTAW methodology. Utilizing the GTAW methodology remelting of the...
Geometrical and mechanical analysis of 3D casted skeleton structure
The article presents selection of the geometry of engineering casted skeleton structure using the analysis of the stress state of structural variants. The main criterion for selection was using the simplest geometry of c...
Effect of silicon on the structure and mechanical properties of high-vanadium cast iron
The results of microstructural examinations and mechanical tests carried out on Fe-C-V and Fe-C-V-Si alloys solidifying in volumetric mode, containing 1,38-1,83%C, 6,76-14,72%V and 1,05-3,69 Si, have been reported. The e...
Application of calorimetry in evaluation of phase transformations in the selected hypoeutectic silumins
The investigations of phase transformations described in this study were carried out on hypoeutectic alloys from the Al-Si during heating and cooling. The determination and analysis of characteristic temperature values f...