The Determination of the Phase Transformations and the Activation Energies in TiNi Smart Alloys
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2016, Vol 4, Issue 3
Abstract
In this study, the phase transformation characteristics of a Ti50,1Ni49,9 (% at.) alloy were investigated through Dynamic Scanning Calorimetry technique with various heating/cooling rates and the effects of the heating/cooling rates on properties such as phase transformation temperatures and hysteresis were studied. Activation energies of the transformations completed with different heating/cooling rates were calculated using Kissinger and Ozawa methods. On the other hand, the thermal cycles were repeated 5 times to track the possible effects of cycling on the properties. It was found that the transformation temperatures decreased with cycling while the thermal hysteresis increased with the heating/cooling rate.
Authors and Affiliations
Emre ACAR
Keywords
Related Articles
- EP ID EP479254
- DOI -
- Views 113
- Downloads 0
Review of the Solid-State Transformers and an Application of Full Bridge DC/DC Converter
With the increased power to weight ratio, corresponding to the developments in material science, the demand for high frequency transformers (HFT) in air, land, marine and aerospace technologies where the weight is partic...
Real Time Measurement of Average Winding Resistances of Transformers
The monitoring of transformers that are expensive equipment of power systems is the one of important issues. Transformer monitoring systems are usually used in order to detect failures, to determine the lifetime, to meas...
Real-time monitoring of medical data via GPRS
In this study, an embedded real time system was designed for the mobile phone to telemonitoring and checking the status of patients. The ECG, Oxygen Saturation in arterial blood and blood pressure signals were transferre...
The barrier height (BH) and ideality factor (n) distribution in identically prepared Al/ Bi3Ti4O12/n-Si (MFS) structures
In this study, the values of barrier heights and ideality factors of identically fabricated Au/BTO/n-Si (MFS) type SBDs (60 dots) have been obtained from their intercepts and slopes linear parts of forward bias lnI vs V...
A Performance Comparison of Conventional and Transverse Flux Rotating Switched Reluctance Motors
High power and torque densities have been claimed for transverse flux structures over the conventional (radial flux) switched reluctance machine (CSRM) structures in recent publications. A comprehensive comparison betwee...