THE INFLUENCE OF NANO PARTICLES ADDITIVE ON TRIBOLOGICAL PROPERTIES OF AA2024-T4 COATED WITH TiN OR SiN THIN FILMS
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2019, Vol 42, Issue 3
Abstract
In the current study, the radio frequency magnetron sputtering technique was used to sputter a thin layer of titanite nitride (TiN) or silicon nitride (SiN) on the surface of AA2024-T4 alloy. To investigate the wear behavior and coefficient of friction between coated aluminum alloy pin and a steel disc (Ck50) contact bodies, different percentages of Copper oxide (CuO) and molybdenum disulfide (MoS2) Nanoparticles were added to the sunflower and engine (HD 50) oils. The results reveal important enhancement in wear rate and coefficient of friction when Nanoparticles powder was added to the oil in comparison with dry and base oils conditions. The optimum results for wear rate and coefficient of friction were obtained at the 1%wt of both Nanoparticles additive. The results also show a significant enhancement in wear and friction conditions when the surface of the aluminum alloy pin was coated with TiN and SiN in comparison with the uncoated surface
Authors and Affiliations
Nasri S. M. Namer, Sami Ali Nama, Marwan T. Mezher
Keywords
Related Articles
- EP ID EP572152
- DOI 10.26480/jmerd.03.2019.30.34
- Views 75
- Downloads 0
INVESTIGATION ON THE MECHANICAL PROPERTIES OF PLA & ITS COMPOSITE FABRICATED THROUGH ADVANCED FUSION PLASTIC MODELLING
Advanced Fusion plastic modelling (AFPM) based rapid prototyping (RP) technique was emerged as one of the potential Technologies for serving numerous three-dimensional product for tool design purposes. Primarily, Poly La...
COMPUTER WITH CHANGEABLE ARCHITECTURE
The relevance of this article is that, despite the rapid development of computer technologies, it has not been yet invented the architecture that did not have vulnerabilities for hacker attacks. The purpose of the paper...
INFLUENCE OF HEAT TREATMENT ON THE ABSORBED ENERGY OF CARBON STEEL ALLOYS USING OIL QUENCHING AND WATER QUENCHING
Carbon steel alloys are modified by heat treatment processes so that structural components are able to withstand and sustain external forces and loads which specified operating conditions and have desired useful life. In...
FATIGUE FAILURE ANALYSIS OF BIKE CRANK ARM USING SOLIDWORKS SIMULATION
Fatigue analysis probes how cyclic random service loads can often lead to catastrophic structural failure of the component. In this research work the crank bar design of a Bike is validated for Fatigue analysis using SOL...
OPTIMIZE AND ANALYSIS COMPRESSOR WHEEL OF TURBO CHARGER
Blade angle effect on flow field of the compressor wheel. Blade angle of compressor wheel will be analyses computationally by CFD. How the different blade angle of compressor wheel causes the effect on flow field along t...