THE PROBLEM OF SYSTEM FAULT-TOLERANCE
Journal Title: Informatyka Automatyka Pomiary w Gospodarce i Ochronie Środowiska - Year 2014, Vol 4, Issue 4
Abstract
System level self-diagnosis (SLSD) has been deeply investigated in literature. It aims at diagnosing systems composed by units, whichare required to be able to test each other by exchanging information through available links. The article describes a simplified state-transition diagram model which gives a general impression of how checking, diagnosis and recovery can “conjointly” influence the system reliability and fault-tolerance.The model uses the integrated parameters and is very useful as a starting point and is a basis for further refinements.
Authors and Affiliations
Victor Mashkov, Andrzej Smolarz, Volodymyr Lytvynenko, Konrad Gromaszek
Keywords
Related Articles
- EP ID EP73252
- DOI 10.5604/20830157.1130182
- Views 118
- Downloads 0
APPLICATION OF SEMICONDUCTOR GAS SENSORS ARRAY FOR CONTINUOUS MONITORING OF SEWAGE TREATMENT PROCESS REGULARITY
Devices with a array composed of various gas sensors, also called electronic noses, allow to determine the unique pattern of signals (gas fingerprint) for the analyzed gas samples. When the strict measurement conditions...
PROBLEM ODPORNOŚCI SYSTEMU NA USZKODZENIA
Autodiagnostyka na poziomie systemu jest szeroko opisywana w literaturze. Celem jest diagnostyka systemy składającego się z jednostekod których wymaga się aby miały możliwość wzajemnego testowania za pośrednictwem dostę...
THE SOURCES OF RADIATION IN THE SHORT-WAVE RANGE ON THE BASIS OF II-VI HETEROLAYERS
The possibility of obtaining zinc selenide and zinc sulfide layers of hexagonal modification by isovalent substitution method is shown. They are characterized by intensive luminescence which is formed by the dominant ann...
SWIRL FLOW ANALYSIS BASED ON ELECTRICAL CAPACITANCE TOMOGRAPHY
This paper describes an application of dual-plane Electrical Capacitance Tomography (ECT) system for gas-solid swirl flow measuremetns. The angular component of the velocity in the pipes cross section was calculated...
USING THE GPU TO DETERMINING THE AREA THE FLAME IN THE VISION DIAGNOSTIC SYSTEM
This paper presents possibility of using GPU to determine the edge of the image pulverized combustion coal. Compared are the operation time and the accuracy of edge detection area of the flame. Used a method based on the...