The Regeneration Cycle of Cobalt Chemical Conversion Waste Liquid on Aluminum Alloys
Journal Title: Materials Science-Medžiagotyra - Year 2019, Vol 25, Issue 2
Abstract
In this research, the regeneration cycle of cobalt chemical conversion waste liquid, the effects of oxidizing agents on solution service life, and the influence of oxidizing agents on the treatment of waste liquid was studied by the electrochemical performance test. The scanning electron microscopy (SEM) and electrochemical properties analysis was used to study conversion coatings. It was determined that the best oxidizing agent for the cobalt chemical conversion waste liquid was 9 g/L KBrO3. Conversion coatings were thicker and had a higher density when the specific gravity of reclaimed liquid and stock solution was between 1:2 and 1:1.
Authors and Affiliations
Di MA, Zhenzhen XU, Xuejiao LV, Shubai LI, Jilei WANG, Zairan YU, Zebo TANG, Guohua ZHANG
Keywords
Related Articles
- EP ID EP581459
- DOI 10.5755/j01.ms.25.2.19131
- Views 53
- Downloads 0
A Novel Approach for Accelerated Fabrication of Calcium Hydroxyapatite Thin Films
In this study we demonstrate, that sol–gel route is suitable to quicker obtain calcium hydroxyapatite (Ca10(PO4)6(OH)2, CHAp) coatings on crystalline Si substrate by modified dip-coating technique. The substrate was dip-...
Preparation and Electrochemical Testing of Polyaniline (PANI) Nanoparticles with Uniform Morphology and Good Dispersion in a Water-task-specific Ionic Liquid Medium
Polyaniline (PANI) nanoparticles with uniform morphology and good dispersion were prepared by using the task-specific Ionic Liquid (IL) 1-ester-3-methyl-imidazolium tetrafluoroborate ([EAMIM]BF4) as a soft template by ch...
Preparation of Foamed Phosphogypsum Lightweight Materials by Incorporating Cementitious Additives
As a byproduct of phosphoric acid industry, phosphogypsum has many environmental problems. In order to recycle phosphogypsum to manufacture lightweight building materials, cementitious additives including fly ash, ground...
The Reactions of Carbon Monoxide Catalytic Oxidation on Ti and Zr-embedded Graphene, a DFT Study
Density functional theory (DFT) calculations have been performed to explore the mechanistic aspects of the catalytic oxidation of CO over Ti and Zr-embedded graphene. The present results show that the title reactions sta...
Effect of Sintering Temperature, Sm3+ Concentration and Excitation Wavelength on Luminescence Properties in Eu3+ Doped Strontium Tungstate Phosphors
The color-tunable SrWO4:0.20Eu3+, Sm3+ phosphors are successfully prepared by co-precipitation method at a low temperature (800 °C). These phosphors can be efficiently excited by near-ultraviolet and blue light. The phas...