The Solidification Study of the Antifriction Sn-Sb Alloy
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2015, Vol 22, Issue 1
Abstract
The solidification study of the antifriction Sn-Sb alloy (HM07) cast on a steel bearing plate in order to obtain bimetallic bearings sized 330xΦ220 is presented in this paper, where the solidification study of the antifriction alloy is also reflected, using a corresponding simulation software (AnyCasting 10). The paper also contains, on the basis of pictograms regarding the solidification simulation study of the HM07 alloy and the metallographic structures realized on the component parts of the bearing and with the help of the electronic microscope and of the scanning electronic microscope, constructive conclusions for production are presented in order to help diminish losses of flaw castings.
Authors and Affiliations
Cincă - Ionel Lupinca, Constantin Marta
Keywords
Related Articles
- EP ID EP448965
- DOI -
- Views 85
- Downloads 0
Command and Running of an Experimental Model Vehicle for Covering a Labyrinth Type Runway
The paper presents the command and running of an autonomous vehicle - experimental model – for covering a labyrinth type runway. The command is realized with a Micro Arduino type platform and the running with two mini en...
Implementation of an Automatic System for the Monitoring of Start-up and Operating Regimes of the Cooling Water Installations of a Hydro Generator
The safe operation of a hydro generator depends on its thermal regime, the basic conditions being that the temperature in the stator winding fall within the limits of the insulation class. As the losses in copper depend...
Contributions to the Transient Study of an Electric Motor with Shorted Moving Coil
In this article is studied the transient regime of an electric motor with a shorted moving coil, into alternating current supplied. The authors present their contributions related to the conceiving, achieving and testing...
Potential and Benefits of Building Information Modeling (BIM) During Pre-Construction, Construction and Post Construction Stage
The construction industry is the main economic support for all countries around the world in which continually adapting to meet competitive challenges around the global market. Nevertheless, the construction project is b...
Accessible Built Environment for People of Disabilities at Mosque: Universal Design
People with disabilities (PwDs) face challenges which effect on their capability to complete everyday activities such as moving around, communicating and fulfilling social roles and the social participation assumes indiv...