THE STUDY OF TRIBOLOGICAL PROPERTIES OF BRONZE CuSn12Ni2 IN THE PRESENCE OF THE EXPLOATIONAL PREPARATION
Journal Title: Tribologia - Year 2009, Vol 227, Issue 5
Abstract
This paper presents the results of research on the tribological properties of bronze CuSn12Ni2 lubricating machine oil AN-68 and modified PE MLP. A Tester T-05 was used for investigation. The tests demonstrated the desirability of modifying AN-68 by PE MLP. The tribological properties were advantageous.<br/><br/>
Authors and Affiliations
Alicja Laber, Krzysztof Adamczuk
Keywords
Related Articles
- EP ID EP517080
- DOI -
- Views 57
- Downloads 0
Ocena możliwości ograniczenia liczby powtórzeń w badaniach trwałości zmęczeniowej
SIDE PRESSURE IN THE CLOSED FORM DURING THE COMPACTION PROCESS OF LIME-SAND MIXTURE
The article presents an analysis of the impact of compacted granular materials, for example, lime-sand mixture (used in the manufacture of lime-sand brick), the side walls in a closed form. Based on experimental studies,...
ANALYSIS OF HYDRODYNAMIC LUBRICATION OF JOURNAL BEARINGS WITH OIL OF NON-NEWTONIAN PROPERTIES
In this paper, the presented issue concerns hydrodynamic lubrication of the journal bearings with the oil of non-Newtonian properties. For the analysis of the hydrodynamic lubrication, a constitutive model of the third o...
THE INFLUENCE OF THE SHAPE OF RACES FOR THE BALL BEARINGS ON THE LIFE OF BEARINGS
The bearings of the three bearing shaft are usually regarded as ideally stiff articulated supports. In technical literature, the shaft elasticity is the only factor taken into account when determining the reaction and be...
THE INFLUENCE OF PROLONGED KNEADING IN THE PRESENCE OF WATER ON THE TRIBOLOGICAL CHARACTERISTICS OF GREASES CONTAINING ORGANIC AND MINERAL ADDITIVES
This paper presents the tribological characteristics of synthetic greases containing mineral and organic additives after prolonged kneading in the presence of water. The investigated greases were composed on a base of pa...