Theoretical Analysis Regarding the Asymmetrical Fluid Flow Applied to Helicopter Aerodynamics
Journal Title: RECENT - Year 2015, Vol 16, Issue 44
Abstract
The main topic of the present paper is the asymmetrical fluid flow application with the purpose of finding the best solutions to replace the anti-torque rotor of single-rotor helicopters using the Coandă Effect. This would significantly increase the flight performances. The research mainly aims at obtaining a controlled lateral force due to the Coandă flows through the tail boom, a force which would be useful for the stabilization of the lifting rotor applied to the flight of single-rotor helicopters.
Authors and Affiliations
Ionică CÎRCIU, Virgil GEAMĂN, Irinel RADOMIR, Mihai POP
Keywords
Related Articles
- EP ID EP111270
- DOI -
- Views 69
- Downloads 0
Laser Welding of Austenitic Stainless Steel Thin Sheets
This paper presents investigations regarding the laser welding of austenitic stainless steel. Several laser welding tests were made using AISI 304 stainless steel in a butt joint configurations. An 3.3 kW Rofin laser and...
Research on the Influence of Thermoinsulating Cores on the Functioning of Feeders (II)
The paper presents the results of a study on the influence of heat insulation of feeders on the solidification of castings in silica sand moulds. The study was conducted by computer simulation of casting. The study conce...
Automation and Evaluation of the Uncertainty in the Coordinate-Grid Method
A developed methodology for automated implementation of an experiment using the coordinate-grid method is applied. The presented experimental displacements obtained by means of a specialty designed program system are com...
The Analysis of the Technologic Parameters Influence in Obtaining the Alloyed Sintered Steels by Two-Steps Sintering
In the paper there are presented the results of the experimental research for elaborating Mn, Mo, Cr, B and Graphite alloyed steels. There were elaborated mixings with 3% Mn and Fe, 1.5% Mo, 1% Cr and 0.5% B, which have...
Optimizing the Work Centers Loading Level
This paper present a new approach for optimizing the loading level of the work centers in a manufacturing system or supply chain. The loading level problem is solved when the following information is available: how many...