Thermodynamic Analysis For Performance Improvement of Power Plant By Flue Gas Heat Recovery System
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
This analysis shows that how the performance of a thermal power plant can be improved by utilization of waste exhaust flue gas energy. In a power plant, most of the heat loss is from the high-temperature flue gas leaving the boiler. To minimize these heat losses, two flue gas heat recovery systems are proposed. The waste heat of flue gas is used for regenerative heating in the heater. This reduces steam extraction from steam turbine and more power is generated. The waste heat recovery of flue gas decreases coal consumption whose utilization is related to environmental issues. This paper presents a thermodynamic analysis of a reference thermal power plant with a rated power of 500 MW to determine the change in power plant output after the proposed systems.
Authors and Affiliations
ANIRUDH CHAWLA, SHUBHAM SHARMA
Keywords
Related Articles
- EP ID EP279991
- DOI 10.24247/ijmperdfeb201863
- Views 99
- Downloads 0
Improve Gasoline Octane Number and Studying Reid Vapor Pressure Effect and Calorific Value by using Environmental Additives
An assessment for the addition of DO and DOA on the octane number and Reid vapor pressure (RVP) of gasoline with different chemical compositions. The locally produced gasoline was blended with three different ratios (v/v...
The Optimization of Tool Life by Fillet Radiuson Cold Forging Die Using Finite Element and Low Cycle Fatigue Theory
Tool life prediction is an important thing in the metal forging industry. To prolong die life, proper die design is crucial. The objective of this work is to study the fillet radius effect to tool life on taperd cold for...
EVALUATION OF HARDNESS AND CORROSSION BEHAVIOUR OF Al 7075∕TiB2 ∕ Cr2O3 COMPOSITE
Aluminium composite is an attractive material for using in corrossive environment. Many studies have been conducted on corrossion rate in Aluminium composites. In this work Aluminium 7075 composite is reinforced with TiB...
A Fuzzy Multi Objective Technique for the Quantity to be Ordered on Supplier
Economic growth and environmental protection are mutually conflicting in nature. Both issues are to be addressed simultaneously in order to sustain green supply chain management. Suppliers and customers have to focus the...
Manufacture and Analysis of MgB2 Superconducting Wire with Addition Carbon Nano Tube (CNT) by In-Situ
The study has been conducted on making samples of MgB2 superconducting wire, by adding 1% CNT with situ method. MgB2 is a superconducting material that has a critical temperature of 39 K. The making process begins with w...