Transformations of Titanium (IV) Butoxide on Magnetite Surface in the Presence of Pluronic P-123
Journal Title: Фізика і хімія твердого тіла - Year 2015, Vol 16, Issue 1
Abstract
The technique of producing magnetically operated nanocomposites Fe3O4/TiO2 with high specific surface area (to 320 m2/g) was developed. A copolymer poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (Pluronic-123) was used as a template. The processes of converting n-butylortotytanatu (BOT) in TiO2 on the surface of magnetite in the presence of PL when heated, and the structure, magnetic and adsorption properties of nanocomposites Fe3O4/TiO2 were investigated. It is shown that the maximum temperature of the heat treatment of nanocomposites is 500 ºC. It was established that the specific saturation magnetization (σs) of nanocomposites Fe3O4/TiO2 by varying the content of PL ranges from 3.75 to 3.96 μT•m3/kg, while coercive force Hc – 1.47-1.61 kA/m. Adsorption complexes such as Fe3O4/TiO2/DNA were obtained.
Authors and Affiliations
L. S. Semko, L. P. Storozhuk, S. V. Khutornyi, P. P. Gorbyk
Crystal-Chemistry of Point Defects and Mechanisms Formation of Solid Solutions CdxZn1-xTe
A Crystal-formulas defined dominant point defects in solid solutions CdxZn1-x Te for n-and p-type conductivity output binary compounds ZnS and ZnTe. Dependence of the concentration of defects, free carriers and Hall conc...
Thermodynamic Parameters of Lead Sulfide Crystals in the Cubic Phase
Geometric and thermodynamic parameters of cubic PbS crystals were obtained using the computer calculations of the thermodynamic parameters within density functional theory method DFT. Cluster models for the calculation w...
Phase Equilibria in MeIMeIIIP2S6(Se6) Systems Which Include Quaternary Compounds (MeI - Cu, Ag; MeIII - In, Cr)
The interactions of 6 quazibinary systems were investigated by methods of physical and chemical analysis in order to study the formation of solid solutions inside them. The character of interaction in these systems depen...
Formation of Spherulites in Electrodeposited Alloys Fe-Ni and Fe-Cr-Ni
With the use of the methods of scanning electron microscopy and X-ray diffractometry the distinctive features of spherulites creation during electrodeposition of Fe-Ni and Fe-Cr-Ni alloys from sulfate electrolyte on low-...
Problems of Selection of Lubricants for Ethylene High-Pressure Compressors. 4. Investigation of Antifriction Properties of Naphtene and Polyglycol Oils during High Loading of Solid Lubricant Pair
The antifriction properties of naphtene and polyglycol oils during little loading with lubrication of pair bronze-tungsten-carbide-alloy WK-6 (WK-ll) and graphelon-20-WK-6 (WK-11) and high loading with lubrication of pai...