Transient Stability Assessment and Enhancement in Power System
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2014, Vol 4, Issue 9
Abstract
Power system is subjected to sudden changes in load levels. Stability is an important concept which determines the stable operation of power system. For the improvement of transient stability the general methods adopted are fast acting exciters, circuit breakers and reduction in system transfer reactance. The modern trend is to employ FACTS devices in the existing system for effective utilization of existing transmission resources. The critical clearing time is a measure to assess transient instability. Using PSAT, the critical clearing time (CCT) corresponding to various faults are calculated. The most critical faults were identified using this calculation. The CCT for the critical faults were found to change with change in operating point. The CCT values are predicted using Artificial Neural Network (ANN) to study the training effects of ANN. TCSC is selected as the FACTS device for transient stability enhancement. Particle Swarm Optimization method is used to find the optimal position of TCSC using the objective function real power loss minimization. The result shows that the technique effectively increases the transient stability of the system
Authors and Affiliations
Aysha P. A , Anna Baby
Keywords
Related Articles
- EP ID EP110800
- DOI -
- Views 116
- Downloads 0
Experimental study with different cathode and anode humidification temperatures in PEM fuel cell
The paper gives experimental study and analysis of PEM Fuel cell with different humidification temperature. The paper focuses on the effect on the voltage and power obtained from fuel cell under variable humidifica...
Acquisition of Long Pseudo Code in Dsss Signal
Rapid pseudo-code is widely used in spread spectrum communication system, because it has a large datarate and a strong anti-jamming property. But it brings us large of difficulty to acquire it as its long period. A...
Performance Improvement through 5S in Small Scale Industry: A case study
Small scale industries plays an important role in Indian economy.It has emerged as powerful tool in providing relatively larger employment next to agriculture. Itcontributes more than 50% of the industrial produc...
Detection of DC Voltage Fault in SRM Drives Using K-Means Clustering and Classification with SVM
This paper presents a new method of detection of DC voltage fault in SRM drives based on K Means Clustering technique. Also the range of fault is classified using Support Vector Machines (SVM). Switched reluctance motors...
Comparative Study for MCDS and DSR Which Are Used For Packet Forwarding In Ad Hoc Network
Abstract: this paper provides a brief overview of the operation of the DSR protocol; providing only enough detail that the reader can understand the analysis of DSR And comparative study of MCDS and DSR which is us...