Tribological Properties of Biodegradable Universal Tractor Transmission Oil
Journal Title: Tribology in Industry - Year 2016, Vol 38, Issue 2
Abstract
The annual consumption of lubricants in the world is around 40 million tons out of which less than 40 % are collected and properly processed meaning regeneration, re-refining and controlled incineration while the rest is disposed without control thus contaminating soil, water and atmosphere. It's one of the reasons that the last twenty years the environmentally friendly lubricants are more and more used. For the production of environmentally friendly lubricants are mostly used vegetable oil. In the field of the application of environmentally friendly lubricants attention should be given to the technical requirements including protection from the wear, corrosion protection, high load carrying properties and fulfilment of all the requirements imposed by the producer of the mechanical system. This paper presents development and testing of the biodegradable universal tractor transmission oil (UTTO) based on the vegetable oils. Tribological properties of the oils based on rapes oil, sunflower and soya, after corresponding testing, compared with the features of the commercially available mineral universal tractor transmission oil.
Authors and Affiliations
M. Stojilković , M. Kolb
Keywords
Related Articles
- EP ID EP112463
- DOI -
- Views 118
- Downloads 0
Tribological Properties of Silicone Rubber-Based Ceramizable Composites Destined for Wire Covers. Part I. Studies of Block-On-Ring Friction Contact
Ceramizable composites of silicone rubber matrix become more and more popular materials destined for wire covers, what can enhance fire safety of building increasing operation time of important equipment or devices (eg f...
Eco-Friendly (Water Melon Peels): Alternatives to Wood-based Particleboard Composites
The aim of this study was to investigate the suitability of using water melon peels as alternatives to wood-based particleboard composites. The water melon peels composite boards were produced by compressive moulding usi...
Quality of Dynamics of Gas-static Thrust Bearing with Movable Carrying Circle on Elastic Suspension
The aim of the work is to present a construction, a mathematical model and a method for calculating the indicators quality dynamics of a gas-static thrust bearing with a сarrying center on an elastic suspension. It is sh...
The Effect of Fibre Bridging on Mode I Interlaminar Fracture Toughness of Carbon-Aramid/Epoxy Intra-Ply Hybrid Laminates
The present study investigates mode I interlaminar fracture toughness of aramid/epoxy, carbon/epoxy and intra-ply hybrid composites, obtained from carbon and aramid fibres as the reinforcement of an epoxy matrix, maintai...
The Wear behavior of UHMWPE against Surface Modified CP-Titanium by Thermal Oxidation
The effects of thermal oxidation duration on hardness, roughness, and wettability of the CP-titanium surfaces were investigated in this paper. The thermal oxidation treatment was done at 700 oC for 12-36 hours in an air...