ВПЛИВ ЗНАЧЕННЯ КУТІВ ПРИЄДНАННЯ ВХІДНИХ СТРУМЕНІВ НА НЕРІВНОМІРНІСТЬШЛЯХОВОГО ПРИТОКУ ВОДИ ДО НАПІРНОГО ТРУБОПРОВОДУ-ЗБИРАЧА

Abstract

Results of the experimental investigation of water inflow into a pressure pipe-collector (PC) depending on the value of the inflow angle b of the input jets are presented. The inner diameter of the experimental PC was of D=20.18 mm, and that of the output nozzles was of d=6.01 mm. The total length of the PC was 2494 mm, and its perforated part was of l = 1800 mm. The distances between the nozzles were equal to 180 mm. The water head H outside the PC was varied from 300 to 1600 mm. PCs with the inflow angles of jets of: 0o ; 45o ; 90o ; 135 o ; 180 o have been investigated. A PC in which b ¹ const has been also tested: in its initial segment, the nozzles were installed at the angle of b = 0 o , and in the middle and terminal segments at the angle of b = 180 o . The greatest non-uniformity of inflow into the PC, was obtained at b = const =135o , and the least one for a PC with b ¹ const . It has been detected that by means of selection of different values of inflow angle b of input jets along PC the non-uniformity of water inflow into PC can be adjusted.

Authors and Affiliations

V. Cherniuk

Keywords

Related Articles

MODELLING OF REINFORCED CONCRETE BEAMS WITH PRETENSIONED FRP REINFORCEMENT

Traditional building materials are regularly improved, finding new operational characteristics and complementing the quality of technical parameters. For a long time and now as reinforcement of reinforced concrete elemen...

THE INFLUENCE OF VERTICAL STIFFENERS ON THE STIFF CHARACTERISTICS OF SILO CAPACITIES FOR GRAIN STORAGE

The paper deals with the behavior of cylindrical steel capacity under the load with different number of vertical stiffeners. It was studied both short constructions with the clamp in all points and relatively tall constr...

Ефективність використання сонячного колектора, суміщеного з покрівлею будинку в системі сонячного теплопостачання

The prospects for the development of solar energy in the world are analyzed. Of the existing types of renewable energy most promising scale resources, environmental cleanliness and the prevalence is solar energy. This is...

Ventilation duct sizing tools - tradition and modernity

One of the most important problems in the hydraulic design of various building services systems is the calculation of the friction factor involved in Darcy-Weisbach equation. Ventilation duct sizing is a good case study,...

Застосування вдосконаленого методу розрахунку похилих перерізів залізобетонних балок

The priority task for researchers of building structures is developing methods of calculation, which would allow performing constructions calculations with higher accuracy, preserving the reliability of the design. This...

Download PDF file
  • EP ID EP284777
  • DOI -
  • Views 100
  • Downloads 0

How To Cite

V. Cherniuk (2017). ВПЛИВ ЗНАЧЕННЯ КУТІВ ПРИЄДНАННЯ ВХІДНИХ СТРУМЕНІВ НА НЕРІВНОМІРНІСТЬШЛЯХОВОГО ПРИТОКУ ВОДИ ДО НАПІРНОГО ТРУБОПРОВОДУ-ЗБИРАЧА. Вісник Національного університету "Львівська політехніка". Серія "Теорія та практика будівництва", 0(877), 218-224. https://www.europub.co.uk/articles/-A-284777