Wastewater Pipeline Design in Accordance with Sea-Pipe-Soil Interaction
Journal Title: International Journal of engineering Research and Applications - Year 2017, Vol 7, Issue 3
Abstract
After the treatment of the wastewaters, a pipeline is used to transfer the treated water from the onshore pump station to the wastewater disposal marine environment. This technique is required for the dilution process in the marine environment instead of a secondary treatment. When the pipeline design for wastewater treatment is implemented, the stability issues of the pipelines must be considered because the pipeline design is based on factors such as currents, waves, geotechnical conditions, physical properties of the water and pipe’s material characteristics. At this point, a computer program is beneficial for the quick design of wastewater pipelines. To find a suitable design under these various design limitation and factors, the algorithm of the SUbmarine Pipeline Design (SUPLID) software was developed which is powerful tool for stability analysis of the submarine pipeline against dynamic current-wave motions and foundation characteristics. The SUPLID program provides a flexible design environment for the design engineer for dimensioning and stabilizing the pipeline system with also artificial weights. In this study, the main methodology and the structure of the SUPLID program was introduced and one of its application for a typical submarine wastewater pipeline was discussed.
Authors and Affiliations
Ümit Gökkuş, Begüm Yurdanur Dağlı, Mehmet Sinan Yıldırım
Keywords
Related Articles
- EP ID EP390895
- DOI 10.9790/9622-07030698106.
- Views 104
- Downloads 0
Design of A High Speed And Low Power 4 Bit Carry Skip Adder
This paper focuses on carry skip adder (CSKA) structure that has a higher speed yet lower power consumption compared with the conventional one. The speed enhancement is achieved by applying Transmission gate logic (TG) t...
Study on the Influence of the Shape of Leaf Spring on the Stress and the Kinematic Characteristics
This paper is based on a novel shape of asymmetric few-leaf spring, which is used in the traditional parabolic leaf spring. By means of experiments and finite element method,we compared the stressdistribution and kinemat...
Comparison of Mechanical Properties of Bare and Stellite-21 Coated Aisi 316l, Sprayed By D-Gun Process
Present paper describes the mechanical properties of Stellite-21 coated AISI- 316LStainless steel. Specimens were coated using Detonation Gun thermal spray process,with different coating thicknesses of Stellite-21 rangin...
Design and Development of Automatic Weight Based Rubber Sheets Cutting Machine
This Paper gives the detailed information about the design and development of automatic weight based rubber cutting machine for rubber industries. At present conventional method used in rubber industries are cut the rubb...
Analysis of Emission from Petrol Vehicles in the Koforidua Municipality, Ghana
Koforidua has seen its fair share in the increase in the number of cars on its roads over the past decade. This has resulted in progressive increase in traffic congestion on the roads and could lead to deterioration in t...