Zinc Layer Removal at the Steel Appliances Scraps
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2005, Vol 28, Issue 1
Abstract
All appliances contain an important quantity of steel and iron. These can be further recycled at the end of product usefulness. A component of the appliances is the bodies. These are made from galvanized steel. A study for the zinc coated layer removal from the surface of the galvanized steel, prior to recycling the steel scrap by melting in the steelmaking process is presented.
Authors and Affiliations
Lucica BALINT, Anişoara CIOCAN, Simion Ioan BALINT
Keywords
Related Articles
- EP ID EP664776
- DOI -
- Views 106
- Downloads 0
A Thermodynamic Contact Problem for Elastic-Viscoplastic Materials
Mathematical modeling of stress generation and heat transfer in casting processes is a difficult and complex subject that is now receiving increased attention. In this paper, we study a dynamic problem which describes th...
The Influence of the Number of Blades and the Number of Levels on Behavior of the "S" - Rotor Experimental Models
The paper is based on wind tunnel (WT) experiments on experimental models (EMs), vertical axis wind turbines (VAWT), Savonius (SWT, "S" Turbine). The experimental models had the maximum dimensions: height of 0.395 m, and...
Influence of Cooling Oil on the Surface Quality of the Rolled Strip
The excess of emulsion used in the lamination process leads to the formation of drops which in the annealing process forms spots of burned emulsion. It was also shown to cause formation areas with high carbon concentrati...
Monitoring of the Rolling Mill Vibration
These researches show the influence of mill vibration on the thickness profile of the stainless steel sheet. The alloy elements like Ni and Cr inside the stainless steel could amplify the rolling mill vibration and dete...
Research Regarding the Obtaining of Some Composite Materials with Metallic Matrix from Aluminium and FeTi (3% Ti) Refractory Particles
The aim of the paper is to create a composite material by a mechanical mixing method to be used in the field of steels elaboration in the deoxidizing and alloying stage.