The simulation analyses and experimental tests results of the influence of
the direction and parameters of tangential vibrations and the velocity of
drive on friction and driving forces in sliding motion are presented in...
An important factor in the proper operation of a mill is the appropriate
planning conditions of exploitation rollers, because this factor is the
limiting element in the production process. The article presents a set of
o...
Wyznaczono współczynniki tarcia dla trzech serii próbek poddanych odmiennym procesom obróbki cieplnej
(brak obróbki cieplnej, przesycanie, utwardzanie wydzieleniowe). Obróbka cieplna przygotowanych próbek
miała na celu z...
Heat generation and dissipation in dry polymer bearings are important aspects in their design and operation,
because the overheating may lead to fast wear or product damage. The estimation of the maximum temperature
unde...
The paper presents the results of the environmental impact study of an
adhesive additive, dissolved in the mineral, vegetable, and synthetic oils, on
the change of the composition of the surface layer of the wear scar af...
EP ID EP270329
DOI -
Views 54
Downloads 0
How To Cite
Tomasz Trzepieciński (2013). Analysis of the friction influence on change of surface topography in strip drawing test. Tribologia, 247(1),
125-134. https://www.europub.co.uk/articles/-A-270329
Sign In Europub
For faster login or register use your social account.
ANALYSIS OF THE INFLUENCE OF PARAMETERS OF TANGENTIAL VIBRATIONS AND VELOCITY OF DRIVE ON FRICTION FORCE IN SLIDING MOTION
The simulation analyses and experimental tests results of the influence of the direction and parameters of tangential vibrations and the velocity of drive on friction and driving forces in sliding motion are presented in...
MODELLING THE EFFECT OF THE USE OF ROLLERS ON THEIR WEAR
An important factor in the proper operation of a mill is the appropriate planning conditions of exploitation rollers, because this factor is the limiting element in the production process. The article presents a set of o...
STRUKTURA I WSPÓŁCZYNNIK TARCIA SPAWANYCH POŁĄCZEŃ STOPÓW NIKLU INCONEL 625 I INCONEL 718
Wyznaczono współczynniki tarcia dla trzech serii próbek poddanych odmiennym procesom obróbki cieplnej (brak obróbki cieplnej, przesycanie, utwardzanie wydzieleniowe). Obróbka cieplna przygotowanych próbek miała na celu z...
CHALLENGES AND METHODS IN ANALYZES OF THE HEAT TRANSFER IN POLYMER DRY BEARINGS
Heat generation and dissipation in dry polymer bearings are important aspects in their design and operation, because the overheating may lead to fast wear or product damage. The estimation of the maximum temperature unde...
ANALYSIS OF WEAR SCAR SURFACES AFTER RUBBING TEST WITH LUBRICANTS CONTAINING ADHESION ADDITIVE
The paper presents the results of the environmental impact study of an adhesive additive, dissolved in the mineral, vegetable, and synthetic oils, on the change of the composition of the surface layer of the wear scar af...