Analysis of Three Phases Asynchronous Slip Ring Motor Performance Feedback Type 243
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2017, Vol 2, Issue 1
Abstract
Induction motor is an Alternating Current Electric Motor (AC), this motor most widely used. There are two types of rotor on three-phases asynchronous motor, the squirrel-cage rotor and the slip ring rotor. Every motor has its own characteristic, it have been affect the used of the motor. In this research is aiming to know three-phases asynchronous slip ring motor performance on unloaded and loaded condition. On its condition, the variation resistance starting from 0Ω - 25Ω. The results of three-phases asynchronous slip ring motor on unloaded condition having maximum output power 58 W and maximum torque 0.22 Nm in 25Ω of resistance. While in the condition loaded having a maximum Pin 131,5 W, maximum Pout 109,31 W, maximum torque 2,08 Nm and maximum efficiency 95%. The analysis was done by knowing the relation between torque vs speed and efficiency vs load. The result shows that the increasing of motor speed have been give affect the decreasing of motor torque in according with the torque formula. In the other result, it can be seen that increasing of the load, efficiency have been increase
Authors and Affiliations
Sardono Sarwito, Semin Semin, Achmad Suherman
Keywords
Related Articles
- EP ID EP247655
- DOI 10.12962/j25481479.v2i1.2517
- Views 253
- Downloads 0
Modelling the Turbocharger Cut Off Application Due to Slow Steaming Operation 12RTA96C-B Engine
Out of the total operational costs of a ship, fuel costs account for by far the highest proportion. In view of the global economic situation and the rising oil prices, shipowners and charterers are looking for solutions...
Evacuation Analysis of 1200 GT Passenger Ship in Case of Fire using Agent-Based Modeling Approach
This study discusses about safety on board especially during fire condition. During fire, all passengers and crew had to beevacuated into safe place. The study observe at 1200 GT passenger ships, a typical ship which hav...
Analysis Effect of Duct Length– Nozzle Diameter Ratio and Tip Clearance Variation on the Performance of K-Series Propeller
One type of ship propeller is a ducted propeller. Ducted propellers are propellers with sheath or duct that can increase thrust on the propeller and useful for directing the flow of water that will pass through the Prop...
Concept for a LNG Gas Handling System for a Dual Fuel Engine
Nowadays, ships are using LNG as main engine fuel because based on the facts that LNG has no sulphur content, and its combustion process, LNG produces low NOx content compared to heavy fuel oil and marine diesel oil. LNG...
Information Connectivity as A Primary Instrument to Enhance Transport Connectivity
Remotely located islands posses their own unique beauties and their common challenges. A case study on Maratua to enhance the quality of life is perceived to be achieved through the enhancement of the transport connectiv...