ASPECTS CONCERNING THE AIR POLLUTION WITH AIRFLOATED MATTER (PM10) IN BOTOSANI TOWN AREA
Journal Title: TEHNOMUS - Year 2012, Vol 19, Issue 1
Abstract
The present study presents the results of a monitoring in the period 2000-2010 of pollution with particulate matter, the fraction PM10, in the air of Botosani municipality, having as main objective the evaluation of the atmosphere degree of pollution. The atmosphere contamination with air-floated matter can have natural causes, as entrainment of particles from the surface soil by the wind, or anthropogenic: the traffic because of fuels burn and emission, because of brake and tires wear, by lifting non-skid material on roads but also from the production processes (metallurgical industry, chemical industry etc), burns in the energetic sector, building sites and road transport, industrial and municipal dumps stockpiles and storehouses, individual heating systems, especially those which use solid fuels.
Authors and Affiliations
Paul Narcis VIERU, Nicoleta Delia VIERU
Keywords
Related Articles
- EP ID EP114549
- DOI -
- Views 133
- Downloads 0
USING VIRTUAL PARTS TO OPTIMIZE THE METROLOGY PROCESS
In the measurement process, there are many parameters affecting the measurement results: the influence of the probe system [3,5,7,15,10,16,17,19,21], material stiffness of measured workpiece [7], the calibration of the p...
MOLTEN METAL PHASE DURATION EFFECT ON THE STRUCTURE AND HARDNESS OF HIGH-CARBON FUSED COATING
The duration of the molten metal phase in the process of crystallization is an important factor determining the structure of the fused high-carbon coating.Theanalysishasshownthatthedurationofthe liquidmetalphase inaweldi...
RESEARCH ON STRESS AND DEFORMATION STATE IN PLASTICAL BENDING WITH STRETCHING
The paper presents a theoretical solution of the stress and deformation state in plastically bending with stretching. It was established calculus relations of the neutral layer relative displacement coefficient, bending...
INFLUENCE OF POLYMER CONCENTRATION ON THE PERMEATION PROPERTIES OF NANOFILTRATION MEMBRANES
Driving force membrane processes seem to be most useful for water treatment. Membranes are very effective in removing a wide variety of water contaminants. Therefore, the use of these processes in water purification to r...
IMPLEMENTING A SPC INTEGRATED SYSTEM TO IMPROVE MANUFACTURING PROCESSES IN AUTOMOTIVE INDUSTRY
Nowadays challenges emphasize greatly on the accomplishment of a high level of quality in manufacturing processes, especially in automotive industry. Various methods have been used in order to find ways to organize monit...